in0
September 21, 2021, 8:49am
4
That's the original one.
There's a nice 3rd party one here:
A discussion that looks maybe relevant here:
opened 11:13PM - 06 Feb 21 UTC
Tested with the reference sketch
https://github.com/ArminJo/DigistumpArduino… /blob/master/digistump-avr/libraries/DigisparkCDC/examples/CDC_LED/CDC_LED.ino
Uploading works fine, but as soon as the bootloader exits and the USB CDC device is supposed to be created..
Translated: "USB device was not recognized. The last USB device that has been connected to this computer, did not work ordinarily and wasn't recognized by Windows."
Device manager says
"The USB device has returned an invalid USB configuration descriptor".
Tested board is the http://digistump.com/products/1
Selected Arduino IDE settings
Drivers were installed as per https://github.com/ArminJo/DigistumpArduino#driver-installation.
There is also support in this platform:
Arduino core for ATtiny 1634, 828, x313, x4, x41, x5, x61, x7 and x8 - GitHub - SpenceKonde/ATTinyCore: Arduino core for ATtiny 1634, 828, x313, x4, x41, x5, x61, x7 and x8
I know there were some interesting discussions about drivers in that repository's issue tracker or pull requests but I don't have time to find them right now. You might try a search to see what you find.
1 Like