Display Temp Value on LCD Screen

This is what I have so far. I can not figure out how to print the temperature value onto the screen. Any help would be nice.

#define PumpOn 13
#define PumpOff 66
#include <OneWire.h>
#include <DallasTemperature.h>
int PumpSwitch = 2;
int ResSwitch = 5;
int Overflow = 8;
int Pump = 11;
int PumpState = PumpOff;
int interval_Time = 0;
const int temperaturePin = 0;
#define ONE_WIRE_BUS 10
#define TEMPERATURE_PRECISION 9
OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire);
#include <Wire.h>
#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);

void setup()
{
pinMode(PumpSwitch, INPUT);
pinMode(ResSwitch, INPUT);
pinMode(Overflow, INPUT);
pinMode(Pump, OUTPUT);
Serial.begin(9600);
lcd.begin(20,4);
for (int i = 0; i<3; i++)
{
lcd.backlight();
delay(250);
lcd.noBacklight();
delay(250);
}
lcd.backlight();
lcd.setCursor(0,1);
lcd.print(" GO ");
delay(2000);
sensors.begin();
}

void loop()
{
Serial.print(“Requesting temperature…”);
sensors.requestTemperatures();
Serial.println(“Done”);
Serial.print(" The Temperature is:");
Serial.print(sensors.getTempFByIndex(0));

lcd.clear();

lcd.setCursor(0,0);
lcd.print(TempF);

if (PumpState == PumpOff)
{
if (digitalRead(Overflow) == LOW)
{
digitalWrite(Pump, LOW);
PumpState = PumpOff;
}
else
{
if (digitalRead(ResSwitch) == HIGH)
{
digitalWrite(Pump, LOW);
PumpState = PumpOff;
}
else
{
if (digitalRead(PumpSwitch) == HIGH)
{
digitalWrite(Pump, HIGH);
PumpState = PumpOn;
interval_Time = 0;
}

}
}
}
if (PumpState == PumpOn)
{
if (digitalRead(Overflow) == LOW)
{
digitalWrite(Pump, LOW);
PumpState = PumpOff;
}
else
{
if (digitalRead(ResSwitch) == HIGH)
{
digitalWrite(Pump, LOW);
PumpState = PumpOff;
}
else
{
interval_Time = interval_Time +1;
delay(100);
if (interval_Time >= 100)
{
digitalWrite(Pump, LOW);
PumpState = PumpOff;
}
}
}
}
}

Maximum of one thread per question, please.

http://forum.arduino.cc/index.php?topic=230744.new