I am transmitting about 15 messages on LS can ( I am using a HS to LS converter). All messages that have a 3 digit ID such as 0x111 will all go out on the bus and I can see them in Vector Canoe. But there are some messages with 2 digit and 1 digit ID's such as 0x0 or 0x14 and they will not show up in Canoe. Also I am getting error frames along with 3 digit id messages in the trace window in Canoe for about the first 3 seconds of transmission and then the bus shuts down. I am guessing it has something to do with the ID's of the frames that are not showing up on the trace window in Canoe. Do I have to do any bit stuffing or anything like that on the ID's that are shorter than 3 digits? As you can tell I am not a programming expert so if I am using incorrect verbage please forgive me. BTW these are all standard frames.