hi
i have my new arduino board now for a week and it worked perfect, but since yesterday i get the following error message when i'm trying to upload a sketch.
The "L" light is blinking very rapidly all the time and also pressing the reset button changes nothing. It read through the otherr topics in the forum and also the troubleshooting guide, but nothing helped. Does any one of you have a solution for this problem?
thanks
here is the error message
Binary sketch size: 0 bytes (of a 14336 byte maximum)
hardware/tools/avr/bin/avrdude -Chardware/tools/avr/etc/avrdude.conf -v -v -v -v -pm168 -cstk500v1 -P/dev/cu.usbserial-A9007LGc -b19200 -D -Uflash:w:/Applications/Arduino/examples/Digital/Blink/applet/Blink.hex:i
avrdude: Version 5.4-arduino, compiled on Oct 9 2007 at 11:20:31
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is "hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/martintiefengrabner/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/cu.usbserial-A9007LGc
Using Programmer : stk500v1
Overriding Baud Rate : 19200
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: Send: Q [51] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding