Olá Amigos
Eu li aqui no forum um artigo ensinando a gravar um Atmega328 que esta espetado em uma protoboard, e estou seguindo rigorosamente o tutorial, movi a pasta breadboard para a pasta hardware conforme pedi no tutorial, mas não esta funcionando, porque ?
Estou seguindo esse esquema de conexões:
Erro:
Placa breadboard:avr:atmega328bb não define uma preferência 'build.board'. Autoconfigurada para: AVR_ATMEGA328BB
O sketch usa 450 bytes (1%) de espaço de armazenamento para programas. O máximo são 30.720 bytes.
Variáveis globais usam 9 bytes de memória dinâmica.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x11
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x11
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x11
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x11
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x11
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x11
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x11
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x11
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x11
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x11
Problema ao carregar para a placa. Veja http://www.arduino.cc/en/Guide/Troubleshooting#upload para sugestões.
Veja o tutorial:
Obrigado