E32-TTL-100 - How to use the RF module?

Projects Networking, Protocols, and Devices
21

Hi All,

I have started working with the KrisKasprzak/EBYTE files and could do with some help configuring my two E-32-868T20D units to the same address and speeds and such like.

The two units return different information shown below

Model no.: 45
Version : D
Features : 14

Mode (HEX/DEC/BIN): C0/192/11000000
AddH (HEX/DEC/BIN): 0/0/0
AddL (HEX/DEC/BIN): 0/0/0
Sped (HEX/DEC/BIN): 18/24/11000
Chan (HEX/DEC/BIN): D/13/1101
Optn (HEX/DEC/BIN): 0/0/0
Addr (HEX/DEC/BIN): 0/0/0

SpeedParityBit (HEX/DEC/BIN) : 0/0/0
SpeedUARTDataRate (HEX/DEC/BIN) : 3/3/11
SpeedAirDataRate (HEX/DEC/BIN) : 0/0/0
OptionTrans (HEX/DEC/BIN) : 0/0/0
OptionPullup (HEX/DEC/BIN) : 0/0/0
OptionWakeup (HEX/DEC/BIN) : 0/0/0
OptionFEC (HEX/DEC/BIN) : 0/0/0
OptionPower (HEX/DEC/BIN) : 0/0/0

Model no.: 45
Version : D
Features : 14

Mode (HEX/DEC/BIN): C0/192/11000000
AddH (HEX/DEC/BIN): 0/0/0
AddL (HEX/DEC/BIN): 0/0/0
Sped (HEX/DEC/BIN): 18/24/11000
Chan (HEX/DEC/BIN): D/13/1101
Optn (HEX/DEC/BIN): 44/68/1000100
Addr (HEX/DEC/BIN): 0/0/0

SpeedParityBit (HEX/DEC/BIN) : 0/0/0
SpeedUARTDataRate (HEX/DEC/BIN) : 3/3/11
SpeedAirDataRate (HEX/DEC/BIN) : 0/0/0
OptionTrans (HEX/DEC/BIN) : 0/0/0
OptionPullup (HEX/DEC/BIN) : 1/1/1
OptionWakeup (HEX/DEC/BIN) : 0/0/0
OptionFEC (HEX/DEC/BIN) : 1/1/1
OptionPower (HEX/DEC/BIN) : 0/0/0

How can i set these to the same values so i can get communication between them?
Thanks