Da pochi giorni è disponibile la versione 6 di Eagle definitiva, purtroppo contiene un grave bug relativo al CAM processor, è la parte che genere i file gerber da mandare al service per la produzione, che può creare seri problemi al pcb.
Questa è la warning ufficiale di Cadsoft :
WARNING: Most unfortunately, after the whole release process for version 6.0.0 had been finished, it turned out that there is a bug in the polygon handling of the CAM Processor.
If a board contains signal polygons that have their “Orphans” parameter set to “off”, and the CAM Processor is used to generate production data with the “pos. Coord” (positive coordinates) option turned on, and if this actually leads to an offset in the CAM data, it can happen that parts of the signal polygons are not drawn, even though they are not orphans, and vice versa.
This may lead to missing electrical connections or copper in places where this is not intended.
As an immediate workaround you can turn the “pos. Coord” option off.
We are working on a solution for this and will release a fixed version as soon as possible.
Sorry for the inconvenience.
Se volete usare la nuova release di Eagle per conoscerla limitandovi alla eventuale stampa dei pcb ad uso casalingo non ci sono problemi, non usatala assolutamente per inviare i file ad un service per la produzioni di prototipi o serie. Cadsoft dovrebbe rilasciare a breve la patch al problema, in tutti i casi è bene attendere qualche settimana dopo il rilascio prima di passare all'uso in via definitiva alla nuova release.