Eco Watch - No device found when trying to upload code

Official Hardware Kits Plug and Make Kit
1

WARNING: library ArduinoGraphics claims to run on samd architecture(s) and may be incompatible with your current board which runs on renesas_uno architecture(s).
Sketch uses 132972 bytes (50%) of program storage space. Maximum is 262144 bytes.
Global variables use 14316 bytes (43%) of dynamic memory, leaving 18452 bytes for local variables. Maximum is 32768 bytes.

Restarting in bootloader mode
Flashing with command:/Users/adit/.arduino-create/arduino/bossac/1.9.1-arduino5/bossac -d --port=cu.usbmodem64E8335BDDA42 -U -e -w /var/folders/s9/80tq2z1d6tz6wjch2gtrsf180000gn/T/arduino-create-agent1469738927/Eco_Watch_jan23a.bin -R
Set binary mode
Send auto-baud
Set binary mode
No device found on cu.usbmodem64E8335BDDA42
Executing command: exit status 1

Tried the reset and still not working. Any ideas?

2

Had to reconnect the board to laptop and it started working

1 Like
3

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.