ENS160 stops working after LoRa module is power-cycled

[sonofcy]

@ellean_13

  // Initialize LoRa
  SPI.begin(SCK, MISO, MOSI, SS);
  LoRa.setPins(SS, RST, DI0);
  if (!LoRa.begin(BAND)) {
    Serial.println("LoRa initialization failed!");
    display.clearDisplay();
    display.setCursor(15, 25);
    display.println(F("LoRa Failed!"));
    display.display();
    while (1);

On a LORA power cycle, the ESP32 must also be reset so you can run the startup LORA code.