EDIT for those coming here from a google search.
-I had Atmel AVR Studio drive installed for the avrisp mk2
Have learned this is NOT compatible with Arduino IDE
Details here on the fix…
- Also after fix still had issues with Arduino IDE sending commands too fast when burning a bootloader, am raising this as an issue in the Arduino Suggestions forum.
I’m trying to burn code or a bootloader into several Arduinos.
Arduino IDE 1.6.3
Genuine AVR ISP Mk2 - correctly identified in device manager.
Devices in question…
Modern Device BBB
Modern Device RBBB
IC Station Nano (counterfeit FTDI chip)
In tools have selected…
Board (as required)
Processor (as required, BBB has a 168, RBBB has a 328)
Programmer AVRISP mkII
Tools > Burn Bootloader result…
avrdude: usbdev_open(): did not find any USB device "usb" Error while burning bootloader.
When trying to burn code using “Programmer”
Build options changed, rebuilding all Sketch uses 1,030 bytes (3%) of program storage space. Maximum is 30,720 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2,039 bytes for local variables. Maximum is 2,048 bytes. avrdude: usbdev_open(): did not find any USB device "usb"
So not having a great deal of luck here, any ideas?