#include <iotgecko.h>
#define esp_baudrate 115200 // enter baud rate of your wifi module
// initialize the library with the esp8266(wifi module)
iotgecko gecko = iotgecko(esp_baudrate);
String id = [Email_ID]; // iotgecko login id
String pass = [Password]; // iotgecko login password
String ssid = [WIFI_Name]; // SSID/name of your wifi router or wifi hotspot
String pass_key = [WIFI_Password]; //Wifi Password
bool notConected = true;
bool login = false;
const int number_of_loads = 4; // number of loads/devices to control
int load_status[number_of_loads];
//Assign pins for loads
const int load1 = 9;
const int load2 = 10;
const int load3 = 11;
const int load4 = 12;
void setup()
{
Serial.begin(115200);
pinMode(load1,OUTPUT);
pinMode(load2,OUTPUT);
pinMode(load3,OUTPUT);
pinMode(load4,OUTPUT);
digitalWrite(load1,LOW);
digitalWrite(load2,LOW);
digitalWrite(load3,LOW);
digitalWrite(load4,LOW);
Serial.println("iot home automation");
delay(2000);
Serial.println("conncecting to wifi");
Serial.print(ssid);
Serial.print("\t");
Serial.println(pass_key);
while(notConected)
{
if(gecko.GeckoConnect(ssid,pass_key)) // connect to wifi with given SSID and password
{
Serial.println("connceted to wifi...");
notConected = false;
}
else
{
Serial.println("can't connect to wifi");
}
delay(1000);
}
Serial.println("connecting to iotgecko.com");
while(!login)
{
if(gecko.GeckoVerify(id,pass)) // login to iotgecko.com with given ID and password
{
Serial.println("connected succesfully");
login = true;
}
else
{
Serial.println("fail to connect");
}
}
}
void loop()
{
int iot_status = gecko.GetgParams(load_status,number_of_loads); // Get load operation commands from server
if(iot_status == InvalidUserIdOrPassword)
{
Serial.println("Invalid UserId or Password");
while(1);
}
else if(iot_status == InvalidData)
{
Serial.println("Invalid Data");
while(1);
}
else if(iot_status == VALID)
{
if(load_status[0]>=0 && load_status[1]>=0 && load_status[2]>=0 && load_status[3]>=0)
{
if(load_status[0]==1)
{
digitalWrite(load1,HIGH);
Serial.println("Load 1 is ON");
}
else
{
digitalWrite(load1,LOW);
Serial.println("Load 1 is OFF");
}
if(load_status[1]==1)
{
digitalWrite(load2,HIGH);
Serial.println("Load 2 is ON");
}
else
{
digitalWrite(load2,LOW);
Serial.println("Load 2 is OFF");
}
if(load_status[2]==1)
{
digitalWrite(load3,HIGH);
Serial.println("Load 3 is ON");
}
else
{
digitalWrite(load3,LOW);
Serial.println("Load 3 is OFF");
}
if(load_status[3]==1)
{
digitalWrite(load4,HIGH);
Serial.println("Load 4 is ON");
}
else
{
digitalWrite(load4,LOW);
Serial.println("Load 4 is OFF");
}
}
else
{
Serial.println("connection lost");
Serial.println("reconnecting...");
while(!gecko.GeckoReconnect()) // reconnect to the iotgecko.com
{
Serial.println("conncetion failed.....reconnecting");
delay(2000);
}
Serial.println("connected succesfully");
}
}
Serial.println();
delay(1000);
}