Error: exit status 1expected '}' at end of input

Projects Programming
1

so i found this code but i keep getting the same error:exit status 1 expected ‘}’ at end of input
can any body help
this is the code:

int s1 = 5;
int s2 = 6;
int s3 = 7;
int s4 = 8;
int x;
int y;
void setup() {
pinMode(s1, OUTPUT);
pinMode(s2, OUTPUT);
pinMode(s3, OUTPUT);
pinMode(s4, OUTPUT);
pinMode(A0, INPUT);
pinMode(A1, INPUT);
}
void loop() {
x = analogRead(A0);
y = analogRead(A1);
if(x<475)
{
digitalWrite(s1, HIGH);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, HIGH);
digitalWrite(s3, LOW);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, HIGH);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, HIGH);
delay(5);
}
else if(x > 550 && x < 550)
{
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, HIGH);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, HIGH);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, HIGH);
digitalWrite(s3, LOW);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, HIGH);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, LOW);
delay(5);
}
else if(x > 500 && x < 550)
{
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, LOW);

if(y<475)
{
digitalWrite(s1, HIGH);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, HIGH);
digitalWrite(s3, LOW);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, HIGH);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, HIGH);
delay(5);
}
else if(y > 475 && y < 550)
{
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, HIGH);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, HIGH);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, LOW);
digitalWrite(s2, HIGH);
digitalWrite(s3, LOW);
digitalWrite(s4, LOW);
delay(5);
digitalWrite(s1, HIGH);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, LOW);
delay(5);
}
else if(y > 500 && y < 550)
{
digitalWrite(s1, LOW);
digitalWrite(s2, LOW);
digitalWrite(s3, LOW);
digitalWrite(s4, HIGH);
delay(5);
}
}

2

Use the IDE autoformat tool (ctrl-t or Tools, Auto format) before posting code in code tags.

Use code tags (the </> icon above the compose window) to make it easier to read and copy for examination

Each { must have its } and each {} , must be in their proper places.

3

ok i will i tried sorry could not figur out how
(this is my first time on arduino forum)

4

You are missing one of these at the end of your sketch.

5

thank you soooo much ive been working on this code for forever and you just gave me the solution