Error in port monitor in Arduino IDE 2.1.1

[dewex]

@ptillisch

Use Compatible serial-monitor Version

As I mentioned above, the incompatibility was introduced in version 0.14.0 of the serial-monitor tool. This means if we can make Arduino IDE use a version of serial-monitor older than 0.14.0 (i.e., 0.13.0) then the problem will be solved.

As I explained previously, Arduino IDE will automatically update the tool if it discovers that a newer version is available than the one that is currently installed. So we must trick Arduino IDE into thinking the 0.13.0 installation is always newer than the latest version of serial-monitor. It determines the version of the tool from the name of the installation folder. So we only need to rename the serial-monitor 0.13.0 installation folder to a very high version number.

I'll provide instructions you can follow to do that:

1. Select File > Quit from the Arduino IDE menus if it is running.
   All Arduino IDE windows will close.
2. Rename the 0.13.0 folder at the following path on your hard drive to 999.999.999:

C:\Users\<username>\AppData\Local\Arduino15\packages\builtin\tools\serial-monitor\0.13.0\

(where <username> is your Windows username)
If looking for it with your file manager or command line, note that the AppData folder is hidden by default. On Windows "File Explorer", you can make it visible by opening the "View" menu, then checking the box next to "☐ Hidden items".
3. Start Arduino IDE.

You should now find that you can use Serial Monitor without encountering that "Port monitor error: EOF " error.

---

If you installed Arduino IDE recently then Arduino IDE will never have installed version 0.13.0 of serial-monitor and so you will not find the C:\Users\<username>\AppData\Local\Arduino15\packages\builtin\tools\serial-monitor\0.13.0\ when following step (3) of the instructions above. In this case it will be necessary to install that version of serial-monitor. I'll provide instructions for doing that:

1. Create a folder named 999.999.999 under the following path on your hard drive:

C:\Users\<username>\AppData\Local\Arduino15\packages\builtin\tools\serial-monitor\

(where <username> is your Windows username)
If looking for it with your file manager or command line, note that the AppData folder is hidden by default. On Windows "File Explorer", you can make it visible by opening the "View" menu, then checking the box next to "☐ Hidden items".
2. Click the following link to open the page of the 0.13.0 release in serial-monitor's GitHub repository:
https://github.com/arduino/serial-monitor/releases/tag/v0.13.0
3. Click the "serial-monitor_v0.13.0_Windows_64bit.zip" link you will see under the "Assets" section of that page.
A download of the ZIP file of the serial-monitor tool will start.
4. Wait for the download to finish.
5. Extract the downloaded file.
6. Move the serial-monitor.exe file from the extracted folder to the folder you created in step (1).
The installation must have this folder structure:

C:\Users\<username>\AppData\Local\Arduino15\packages\builtin\tools\
├── serial-monitor\
│   ├── 999.999.999\
│   │   └── serial-monitor.exe
│   ...
...

@ptillisch , thank you very much! This solution helped me, and now the port monitor is working correctly without errors. Thanks again!