We are trying to upload our programming from the Tools/Servo/Sweep directory and we keep receiving the error message: "avrdude: stk500_getsync(): not in sync: resp=0x00". What are we doing wrong, and how do we get the servo to spin. We have the red wire connected to the 5V pin, the black connected t…

Error Message: "avrdude: stk500_getsync(): not in sync: resp=0x0"

system January 12, 2013, 11:47pm 5

Did you do the driver install under step four at http://arduino.cc/en/Guide/Windows?

Topic		Replies	Views
avrdude: stk500_getsync(): not in sync: resp=0x00 IDE 1.x	2	922	May 5, 2021
avrdude: stk500_getsync(): not in sync: resp=0x00 IDE 1.x	4	1388	May 5, 2021
not in sync: resp=0x33 IDE 1.x	3	1757	May 5, 2021
UNO R3 error avrdude: stk500_getsync(): not in sync: resp=0x00 IDE 1.x	3	1882	May 5, 2021
avrdude: stk500_getsync(): not in sync: resp=0x00 IDE 1.x	3	944	May 5, 2021