Error Message

Guys im getting the following error message on the IDE once I upload a code that requires TX and RX link

"Arduino: 1.6.12 (Windows 8.1), Board: "Arduino/Genuino Uno"

Sketch uses 2,574 bytes (7%) of program storage space. Maximum is 32,256 bytes.
Global variables use 182 bytes (8%) of dynamic memory, leaving 1,866 bytes for local variables. Maximum is 2,048 bytes.
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xb8
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xb0
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x20
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x20
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x60
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x30
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x60
An error occurred while uploading the sketch

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
"
Anyone who has a solution please come forward.

Your code is compiling, but there is a communication problem. Start here: Guide Troubleshooting #upload