Hi guys, I was interested in making a standalone Arduino on a breadboard to make my projects smaller, and bought an Atmega 328p chip with crystals and 22pF caps for it. I am not able to upload the boot loader to it and there's some error that is coming, this is the link I followed (How To Load Bootloader onto Arduino - YouTube)
Also another question, I want to start using Atmel studio 7 to program this Atmega 328p, now because I have burnt the Arduino boot loader into it, will I have problems when uploading code I write on Atmel studio because I have burnt Arduino boot loader onto it?
Please do this:
- (In the Arduino IDE) File > Preferences
- Check the checkbox next to "Show verbose output during: upload
- Click “OK”
- Tools > Burn Bootloader
- After the Burn Bootloader process fails, you’ll see a button on the right side of the orange bar “Copy error messages”. Click that button.
- In a forum reply here, click on the reply field.
- Click the </> button on the forum toolbar. This will add the forum’s code tags markup to your reply.
- Press “Ctrl + V”. This will paste the Burn Bootloader output between the code tags.
- Move the cursor outside of the code tags before you add any additional text to your reply.
thank you for the help, here is the error message I get-
Arduino: 1.8.9 (Mac OS X), TD: 1.46, Board: “Arduino/Genuino Uno”
avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x14
avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x01
avrdude: stk500_initialize(): (a) protocol error, expect=0x14, resp=0x10
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
avrdude: stk500_disable(): unknown response=0x12
Error while burning bootloader.
This report would have more information with
“Show verbose output during compilation”
option enabled in File → Preferences.
You forgot to turn on verbose output during upload.