Error while uploading code

Projects Programming
1

Arduino: 1.8.5 (Windows 10), Board: "LilyPad Arduino, ATmega328P"

Archiving built core (caching) in: C:\Users\MYROND~1\AppData\Local\Temp\arduino_cache_60245\core\core_arduino_avr_lilypad_cpu_atmega328_0c812875ac70eb4a9b385d8fb077f54c.a
Sketch uses 1046 bytes (3%) of program storage space. Maximum is 30720 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -patmega328p -carduino -PCOM7 -b57600 -D -Uflash:w:C:\Users\MYROND~1\AppData\Local\Temp\arduino_build_353850/gesture_control_robot_final.ino.hex:i

avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch

System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf"

Using Port : COM7
Using Programmer : arduino
Overriding Baud Rate : 57600
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xd1
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xd1
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xd1
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xd1
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xd1
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xd1
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xd1
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xd1
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xd1
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xd1

avrdude done. Thank you.

Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

I'm getting this error, helping my little brother with an assignment over TeamViewer, tried everything still the same, windows 10, please help

2

Did you try the steps in the troubleshooting guide?

Is the board really a Lilypad?

3

I tried them, what I'm confused with is the fact that in device manager it shows as just "USB serial port"

4

this is the board that he ordered, and before me intervening the board had initially become hot a lot, could that be the issue????

5

the board had initially become hot a lot, could that be the issue?

Yes, The processor should never become hot. Why it got hot would be important to know so the same thing does not happen to the new Liliypad, cause I think you may need to get a new one. What was connected to the Liliypad? How was it powered?

6

groundFungus:
Yes, The processor should never become hot. Why it got hot would be important to know so the same thing does not happen to the new Liliypad, cause I think you may need to get a new one. What was connected to the Liliypad? How was it powered?

It was powered by a 9v battery I suppose, and he had connected the cables in a wrong way, before asking me.. anyways thanks for the help bud.