# ESP32 Failed Uploading

**URL:** <https://forum.arduino.cc/t/esp32-failed-uploading/1176312>\
**Category:** 3rd Party Boards\
**Created:** [October 8, 2023, 6:55pm UTC](https://forum.arduino.cc/t/esp32-failed-uploading/1176312 "2023-10-08T18:55:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![n545061](https://avatars.discourse-cdn.com/v4/letter/n/bcef8e/32.png) [@n545061](https://forum.arduino.cc/u/n545061)\
**Post date:** [October 8, 2023, 6:55pm UTC](https://forum.arduino.cc/t/esp32-failed-uploading/1176312/1 "2023-10-08T18:55:48Z")

</div>

So I tried using a ESP32-S3 with the Arduino IDE. I was trying to just do the simple blink LED example just to make sure it was working and connected to my computer. I am getting the Failed message pasted below and I have researched as much as I can and I cannot figure it out. Can anyone help.

A fatal error occurred: Failed to write to target RAM (result was 01070000: Operation timed out)  
Failed uploading: uploading error: exit status 2

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [April 5, 2024, 6:56pm UTC](https://forum.arduino.cc/t/esp32-failed-uploading/1176312/2 "2024-04-05T18:56:26Z")

</div>

Closed on April 5, 2024, 6:56pm UTC

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.
