# ESP32 S3 DevKit problems

**URL:** <https://forum.arduino.cc/t/esp32-s3-devkit-problems/1136923>\
**Category:** 3rd Party Boards\
**Created:** [June 11, 2023, 7:02pm UTC](https://forum.arduino.cc/t/esp32-s3-devkit-problems/1136923 "2023-06-11T19:02:01Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![lateralleap](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/lateralleap/32/1098795_2.png) [@lateralleap](https://forum.arduino.cc/u/lateralleap)\
**Post date:** [June 11, 2023, 7:02pm UTC](https://forum.arduino.cc/t/esp32-s3-devkit-problems/1136923/1 "2023-06-11T19:02:01Z")

</div>

I am trying to get the ESP32 S3 DevKitC1 running in the Arduino IDE (version 2.10)

I have installed the latest ESP32 board manager (version 2.09)

The normal Blink sketch seems to upload fine. At the end of the upload I get the "Hard resetting via RTS pin..." message but then nothing happens

I have tried another blink sktech for the S3 that blinks all three onboard LEDs but still nothing happens

I have read other posts suggesting you need to change the Flash PSRAM modes. I have tried the suggestions but still no success

Does anyone have experience of getting this board to run under Arduino IDE?

Thanks

---

<div class="post-metadata">

**Author:** ![oldcurmudgeon](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/oldcurmudgeon/32/1280882_2.png) [@oldcurmudgeon](https://forum.arduino.cc/u/oldcurmudgeon)\
**Post date:** [June 11, 2023, 8:32pm UTC](https://forum.arduino.cc/t/esp32-s3-devkit-problems/1136923/2 "2023-06-11T20:32:43Z")

</div>

I had no problem with the Arduino IDE 1.8.19 version. I don't use any of the IDE v2.x versions ,so I don't know if they have problems.

---

<div class="post-metadata">

**Author:** ![customcontroller](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/customcontroller/32/1013044_2.png) [@customcontroller](https://forum.arduino.cc/u/customcontroller)\
**Post date:** [June 11, 2023, 8:42pm UTC](https://forum.arduino.cc/t/esp32-s3-devkit-problems/1136923/3 "2023-06-11T20:42:08Z")

</div>

After uploading to an S3 board the board must be power cycled to make it  
run the code that was just uploaded. I now use the S3 connected to a USB hub with a  
power button for each port. Using the power button is much easier than  
unplugging and plugging the USB cable. IDE 1.8.19.

---

<div class="post-metadata">

**Author:** ![lateralleap](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/lateralleap/32/1098795_2.png) [@lateralleap](https://forum.arduino.cc/u/lateralleap)\
**Post date:** [June 12, 2023, 11:03am UTC](https://forum.arduino.cc/t/esp32-s3-devkit-problems/1136923/4 "2023-06-12T11:03:27Z")

</div>

Thanks

Turns out I was being silly. The ESP32 S3 DevKitC1 only has RGB LED on GPIO 48 so the normal blink example won't work.

I downloaded a Hello World message to serial console and it worked fine so download is working

Thanks

---

<div class="post-metadata">

**Author:** ![oldcurmudgeon](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/oldcurmudgeon/32/1280882_2.png) [@oldcurmudgeon](https://forum.arduino.cc/u/oldcurmudgeon)\
**Post date:** [June 12, 2023, 5:40pm UTC](https://forum.arduino.cc/t/esp32-s3-devkit-problems/1136923/5 "2023-06-12T17:40:59Z")

</div>

There is a BlinkRGB under the ESP32-\>GPIO examples that uses the onboard RGB LED.

---

<div class="post-metadata">

**Author:** ![rollmops67](https://avatars.discourse-cdn.com/v4/letter/r/eb9ed0/32.png) [@rollmops67](https://forum.arduino.cc/u/rollmops67)\
**Post date:** [November 5, 2023, 11:37am UTC](https://forum.arduino.cc/t/esp32-s3-devkit-problems/1136923/6 "2023-11-05T11:37:18Z")

</div>

Oh thank you @ [oldcurmudgeon](https://forum.arduino.cc/u/oldcurmudgeon) for the hint, I had the same problem with my board's ( ESP32 S3 DevKitC1 clone) RGB led, and was looking for a simple way to turn it on and choose the colour (simple way \>\> no need to load a library like Adafruit Neopixel).  
It works like a charm !

Roland

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [May 3, 2024, 11:37am UTC](https://forum.arduino.cc/t/esp32-s3-devkit-problems/1136923/7 "2024-05-03T11:37:22Z")

</div>

Closed on May 3, 2024, 11:37am UTC

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.
