Well, is didn't understand it eather but the read_user_setup showed: Display driver: 7796.
I run the Read_ID_bitbash but it gives this output:
TFT driver register values:
===========================
Register 0x01: 0x00
Register 0x04: 0x7FFFFF
Register 0x09: 0xFFFFFFFF
Register 0x0A: 0x7F
Register 0x0B: 0xFF
Register 0x0C: 0x7F
Register 0x0D: 0xFF
Register 0x0E: 0x7F
Register 0x0F: 0xFF
Register 0x2E: 0xFFFFFF
Register 0x3F: 0xFFFFFFFF
Register 0xDA: 0x7F
Register 0xDB: 0xFF
Register 0xDC: 0x7F
===========================
Looks like driver chip is: Unknown
I have used a display with pcb and that works fine.
All IM pins are connected to VCC, this can cause the problem but i don't know which pins need 3.3v and which need GND