# ESP8266 can't connect Bad Board?

**URL:** <https://forum.arduino.cc/t/esp8266-cant-connect-bad-board/990496>\
**Category:** General Guidance\
**Created:** [May 10, 2022, 9:20pm UTC](https://forum.arduino.cc/t/esp8266-cant-connect-bad-board/990496 "2022-05-10T21:20:37Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![gor24](https://avatars.discourse-cdn.com/v4/letter/g/e495f1/32.png) [@gor24](https://forum.arduino.cc/u/gor24)\
**Post date:** [May 10, 2022, 9:20pm UTC](https://forum.arduino.cc/t/esp8266-cant-connect-bad-board/990496/1 "2022-05-10T21:20:37Z")

</div>

I have been messing with the ESP8266 for a few days but can't seem to get things going.  
I have an external power supply set to 3.4volts seems to power the board up ok..

installed everything ok choose the generic ESP8266 board.. blue led flashes but can't talk to board.

tried with a UNO and a MEGA same results

Tried a esp8266 flash program and when I run it the Arduino was flashing fast and so was the ESP8266 but didn't write anything to the board, I checked the voltage when flashing to the RX pin and it was dropping to 0volts. so I don't know what else to try or is a bad board?

Thanks

---

<div class="post-metadata">

**Author:** ![anon57585045](https://avatars.discourse-cdn.com/v4/letter/a/ed8c4c/32.png) [@anon57585045](https://forum.arduino.cc/u/anon57585045)\
**Post date:** [May 10, 2022, 9:23pm UTC](https://forum.arduino.cc/t/esp8266-cant-connect-bad-board/990496/2 "2022-05-10T21:23:26Z")

</div>

Hi, there is a lot missing here. Please read the forum guidelines on how to ask a question.

---

<div class="post-metadata">

**Author:** ![Railroader](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/railroader/32/274550_2.png) [@Railroader](https://forum.arduino.cc/u/Railroader)\
**Post date:** [May 10, 2022, 9:38pm UTC](https://forum.arduino.cc/t/esp8266-cant-connect-bad-board/990496/3 "2022-05-10T21:38:27Z")

</div>

> [@gor24](#):
>
> tried with a UNO and a MEGA same results

At 3.4 volt power supply applied to what pin? No surprise it failed.  
No help for us, telling about other failures.

---

<div class="post-metadata">

**Author:** ![Deva\_Rishi](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/deva_rishi/32/227254_2.png) [@Deva\_Rishi](https://forum.arduino.cc/u/Deva_Rishi)\
**Post date:** [May 11, 2022, 8:09am UTC](https://forum.arduino.cc/t/esp8266-cant-connect-bad-board/990496/4 "2022-05-11T08:09:11Z")

</div>

> [@gor24](#):
>
> I have an external power supply set to 3.4volts seems to power the board up ok..

Just post a full schematic of what you have tried, what board you have (link) and how you plan to upload or communicate.

> [@gor24](#):
>
> Tried a esp8266 flash program and when I run it the Arduino was flashing fast and so was the ESP8266 but didn't write anything to the board,

The RX or TX LED ?

Check [this](https://acoptex.com/project/290/basics-project-021a-how-to-upload-sketch-esp8266-esp-01-wi-fi-module-at-acoptexcom/)  
tutorial.

---

<div class="post-metadata">

**Author:** ![hammy](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/hammy/32/238813_2.png) [@hammy](https://forum.arduino.cc/u/hammy)\
**Post date:** [May 11, 2022, 10:22am UTC](https://forum.arduino.cc/t/esp8266-cant-connect-bad-board/990496/5 "2022-05-11T10:22:56Z")

</div>

Have you followed tutorials for this - if it’s the bare 8266 certain pins need to be at certain voltages for it to go into program mode.[Example - note pin connections](https://create.arduino.cc/projecthub/Metavix/programming-the-esp8266-with-the-arduino-ide-601c16)

---

<div class="post-metadata">

**Author:** ![Paul\_B](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/paul_b/32/216376_2.png) [@Paul\_B](https://forum.arduino.cc/u/Paul_B)\
**Post date:** [May 11, 2022, 1:15pm UTC](https://forum.arduino.cc/t/esp8266-cant-connect-bad-board/990496/6 "2022-05-11T13:15:03Z")

</div>

Read [the instructions](https://forum.arduino.cc/t/how-to-get-the-best-out-of-this-forum/679966#posting-code). 😁

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [November 7, 2022, 1:15pm UTC](https://forum.arduino.cc/t/esp8266-cant-connect-bad-board/990496/7 "2022-11-07T13:15:17Z")

</div>

Closed on November 7, 2022, 1:15pm UTC

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.
