esp8266 - NodeMcu V3 CH340 + Lora Ra02 433Mhz

Hello,
I bought this :

https://www.aliexpress.com/item/32647690484.html


and this:

https://www.aliexpress.com/item/32815297086.html

LoRa SX1278 433M

I dont find direct tutorial to this board, but I try similar:

https://www.instructables.com/id/Get-Started-With-XL1276-D01-LoRa-433MHz-SPI-Using-/

Pin:

  1. ANT => Solder to the Antenna provided
  2. GND => GND
  3. DIO1 => D2 / GPIO 4
  4. VCC => 3.3V
  5. DIO0 => D1 / GPIO 5
  6. RESET => D0 / GPIO 16
  7. SCK => D5 / GPIO 14
  8. MISO => D6 / GPIO 12
  9. MOSI => D7 / GPIO 13
  10. NSS => D8 / GPIO 15

I try same connections but it not working

#include <SPI.h>
#include <LoRa.h>

int counter = 0;
/*#define ss 10
#define rst 0
#define dio0 3
*/
void setup() {
  Serial.begin(9600);
  while (!Serial);

  Serial.println("LoRa Sender");
 // LoRa.setPins(ss, rst, dio0);
 //LoRa.setSPIFrequency(4E6);
 long freqErr = LoRa.packetFrequencyError();
 Serial.print("freqErr:");
 Serial.println(freqErr);
 
  if (!LoRa.begin(433E6)) {
    Serial.println("Starting LoRa failed!");
   // while (1);
  }
  Serial.println("LoRa.begin(433E6):OK");
}

void loop() {
  Serial.print("Sending packet: ");
  Serial.println(counter);

  // send packet
  LoRa.beginPacket();
  LoRa.print("hello ");
  LoRa.print(counter);
  LoRa.endPacket();

  counter++;

  delay(5000);
}
10:51:15.550 -> ⸮LoRa Sender
10:51:15.550 -> freqErr:0
10:51:23.905 -> H!⸮ȩ
10:51:24.042 -> ⸮
10:51:24.042 -> ⸮LoRa Sender
10:51:24.042 -> freqErr:0
10:51:32.385 -> ⸮⸮⸮⸮⸮1⸮D⸮5?LoRa Sender
10:51:32.504 -> freqErr:0
10:51:40.874 -> H!⸮⸮⸮)⸮⸮0⸮⸮LoRa Sender

CAN someone help me how to connect it right?

thanks