Exit status 1Exit Status 1 on Nano and most recent ide

Development Tools Uploading
25

Sketch uses 5406 bytes (2%) of program storage space. Maximum is 253952 bytes.
Global variables use 482 bytes (5%) of dynamic memory, leaving 7710 bytes for local variables. Maximum is 8192 bytes.
"C:\Users\jkeen\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/bin/avrdude" "-CC:\Users\jkeen\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf" -v -V -patmega2560 -cwiring "-PCOM3" -b115200 -D "-Uflash:w:C:\Users\jkeen\AppData\Local\Temp\arduino\sketches\B89AA8D6175ED00E27AC5AE6B48B5B3C/ArduinoISP.ino.hex:i"

avrdude: Version 6.3-20190619
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch

     System wide configuration file is "C:\Users\jkeen\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf"

     Using Port                    : COM3
     Using Programmer              : wiring
     Overriding Baud Rate          : 115200

avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_getsync(): timeout communicating with programmer

avrdude done. Thank you.

Failed uploading: uploading error: exit status 1

i hooked everything up exactly as you said to