# Failed uploading: uploading error

**URL:** <https://forum.arduino.cc/t/failed-uploading-uploading-error/1206798>\
**Category:** Uploading\
**Created:** [January 4, 2024, 4:08am UTC](https://forum.arduino.cc/t/failed-uploading-uploading-error/1206798 "2024-01-04T04:08:28Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![sterretje](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/sterretje/32/391294_2.png) [@sterretje](https://forum.arduino.cc/u/sterretje)\
**Post date:** [January 4, 2024, 4:25am UTC](https://forum.arduino.cc/t/failed-uploading-uploading-error/1206798/3 "2024-01-04T04:25:11Z")

</div>

> [@vulcanric-07](#):
>
> I have written a straightforward code in the IDE,

1. Does that straight forward code make use of pins 0 and 1 (anything connected to them)?
2. Anything else connected to the board?
3. What is the serial-to-usb converter on your board (the chip closest to the USB port)? If it's not the CH340 (used on most clones), you can run the [loopback test](https://forum.arduino.cc/t/loop-back-test-instructions/73046/1) and report the results here.
4. What happens when you press and release the reset button; do you get a few short flashes?
5. Which board? The baud rate indicates a board with Optiboot (Uno or new Nano). If it's a Nano, try the different option under tools → processor.
6. Does COM 3 disappear from the list of boards when you disconnect the board?

---

_[View the full topic](https://forum.arduino.cc/t/failed-uploading-uploading-error/1206798)._
