Failing to upload code to ATtiny85 board using USB ISP programmer. (SPI)

Using Arduino Microcontrollers
1

This is the error im getting:

Arduino: 1.8.15 (Windows 10), Board: "ATtiny25/45/85, ATtiny85, Internal 1 MHz"

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In member function 'void SPISettings::init_AlwaysInline(uint32_t, uint8_t, uint8_t)':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:146:16: error: 'SPE' was not declared in this scope

     spcr = _BV(SPE) | _BV(MSTR) | ((bitOrder == LSBFIRST) ? _BV(DORD) : 0) |

                ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:146:16: note: suggested alternative: 'SPH'

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:146:27: error: 'MSTR' was not declared in this scope

     spcr = _BV(SPE) | _BV(MSTR) | ((bitOrder == LSBFIRST) ? _BV(DORD) : 0) |

                           ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:146:27: note: suggested alternative: 'PSTR'

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:146:65: error: 'DORD' was not declared in this scope

     spcr = _BV(SPE) | _BV(MSTR) | ((bitOrder == LSBFIRST) ? _BV(DORD) : 0) |

                                                                 ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:146:65: note: suggested alternative: 'DDRB'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In static member function 'static void SPIClass::beginTransaction(SPISettings)':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:203:5: error: 'SPCR' was not declared in this scope

     SPCR = settings.spcr;

     ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:203:5: note: suggested alternative: 'EECR'

     SPCR = settings.spcr;

     ^~~~

     EECR

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:204:5: error: 'SPSR' was not declared in this scope

     SPSR = settings.spsr;

     ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:204:5: note: suggested alternative: 'ACSR'

     SPSR = settings.spsr;

     ^~~~

     ACSR

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In static member function 'static uint8_t SPIClass::transfer(uint8_t)':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:209:5: error: 'SPDR' was not declared in this scope

     SPDR = data;

     ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:209:5: note: suggested alternative: 'EEDR'

     SPDR = data;

     ^~~~

     EEDR

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:217:14: error: 'SPSR' was not declared in this scope

     while (!(SPSR & _BV(SPIF))) ; // wait

              ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:217:14: note: suggested alternative: 'ACSR'

     while (!(SPSR & _BV(SPIF))) ; // wait

              ^~~~

              ACSR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:217:25: error: 'SPIF' was not declared in this scope

     while (!(SPSR & _BV(SPIF))) ; // wait

                         ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:217:25: note: suggested alternative: 'WDIF'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In static member function 'static uint16_t SPIClass::transfer16(uint16_t)':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:223:11: error: 'SPCR' was not declared in this scope

     if (!(SPCR & _BV(DORD))) {

           ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:223:11: note: suggested alternative: 'EECR'

     if (!(SPCR & _BV(DORD))) {

           ^~~~

           EECR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:223:22: error: 'DORD' was not declared in this scope

     if (!(SPCR & _BV(DORD))) {

                      ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:223:22: note: suggested alternative: 'DDRB'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:224:7: error: 'SPDR' was not declared in this scope

       SPDR = in.msb;

       ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:224:7: note: suggested alternative: 'EEDR'

       SPDR = in.msb;

       ^~~~

       EEDR

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:226:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:226:16: note: suggested alternative: 'ACSR'

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

                ACSR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:226:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:226:27: note: suggested alternative: 'WDIF'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:230:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:230:16: note: suggested alternative: 'ACSR'

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

                ACSR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:230:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:230:27: note: suggested alternative: 'WDIF'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:233:7: error: 'SPDR' was not declared in this scope

       SPDR = in.lsb;

       ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:233:7: note: suggested alternative: 'EEDR'

       SPDR = in.lsb;

       ^~~~

       EEDR

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:235:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:235:16: note: suggested alternative: 'ACSR'

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

                ACSR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:235:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:235:27: note: suggested alternative: 'WDIF'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:239:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:239:16: note: suggested alternative: 'ACSR'

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

                ACSR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:239:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:239:27: note: suggested alternative: 'WDIF'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In static member function 'static void SPIClass::transfer(void*, size_t)':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:247:5: error: 'SPDR' was not declared in this scope

     SPDR = *p;

     ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:247:5: note: suggested alternative: 'EEDR'

     SPDR = *p;

     ^~~~

     EEDR

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:250:16: error: 'SPSR' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:250:16: note: suggested alternative: 'ACSR'

       while (!(SPSR & _BV(SPIF))) ;

                ^~~~

                ACSR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:250:27: error: 'SPIF' was not declared in this scope

       while (!(SPSR & _BV(SPIF))) ;

                           ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:250:27: note: suggested alternative: 'WDIF'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:255:14: error: 'SPSR' was not declared in this scope

     while (!(SPSR & _BV(SPIF))) ;

              ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:255:14: note: suggested alternative: 'ACSR'

     while (!(SPSR & _BV(SPIF))) ;

              ^~~~

              ACSR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:255:25: error: 'SPIF' was not declared in this scope

     while (!(SPSR & _BV(SPIF))) ;

                         ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:255:25: note: suggested alternative: 'WDIF'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In static member function 'static void SPIClass::setBitOrder(uint8_t)':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:292:31: error: 'SPCR' was not declared in this scope

     if (bitOrder == LSBFIRST) SPCR |= _BV(DORD);

                               ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:292:31: note: suggested alternative: 'EECR'

     if (bitOrder == LSBFIRST) SPCR |= _BV(DORD);

                               ^~~~

                               EECR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:292:43: error: 'DORD' was not declared in this scope

     if (bitOrder == LSBFIRST) SPCR |= _BV(DORD);

                                           ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:292:43: note: suggested alternative: 'DDRB'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:293:10: error: 'SPCR' was not declared in this scope

     else SPCR &= ~(_BV(DORD));

          ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:293:10: note: suggested alternative: 'EECR'

     else SPCR &= ~(_BV(DORD));

          ^~~~

          EECR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:293:24: error: 'DORD' was not declared in this scope

     else SPCR &= ~(_BV(DORD));

                        ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:293:24: note: suggested alternative: 'DDRB'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In static member function 'static void SPIClass::setDataMode(uint8_t)':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:298:5: error: 'SPCR' was not declared in this scope

     SPCR = (SPCR & ~SPI_MODE_MASK) | dataMode;

     ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:298:5: note: suggested alternative: 'EECR'

     SPCR = (SPCR & ~SPI_MODE_MASK) | dataMode;

     ^~~~

     EECR

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In static member function 'static void SPIClass::setClockDivider(uint8_t)':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:303:5: error: 'SPCR' was not declared in this scope

     SPCR = (SPCR & ~SPI_CLOCK_MASK) | (clockDiv & SPI_CLOCK_MASK);

     ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:303:5: note: suggested alternative: 'EECR'

     SPCR = (SPCR & ~SPI_CLOCK_MASK) | (clockDiv & SPI_CLOCK_MASK);

     ^~~~

     EECR

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:304:5: error: 'SPSR' was not declared in this scope

     SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((clockDiv >> 2) & SPI_2XCLOCK_MASK);

     ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:304:5: note: suggested alternative: 'ACSR'

     SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((clockDiv >> 2) & SPI_2XCLOCK_MASK);

     ^~~~

     ACSR

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In static member function 'static void SPIClass::attachInterrupt()':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:309:42: error: 'SPCR' was not declared in this scope

   inline static void attachInterrupt() { SPCR |= _BV(SPIE); }

                                          ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:309:42: note: suggested alternative: 'EECR'

   inline static void attachInterrupt() { SPCR |= _BV(SPIE); }

                                          ^~~~

                                          EECR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:309:54: error: 'SPIE' was not declared in this scope

   inline static void attachInterrupt() { SPCR |= _BV(SPIE); }

                                                      ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:309:54: note: suggested alternative: 'ACIE'

In file included from C:\Users\margu\Documents\Arduino\sketch_aug20a\sketch_aug20a.ino:2:0:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h: In static member function 'static void SPIClass::detachInterrupt()':

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:310:42: error: 'SPCR' was not declared in this scope

   inline static void detachInterrupt() { SPCR &= ~_BV(SPIE); }

                                          ^~~~

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:310:42: note: suggested alternative: 'EECR'

   inline static void detachInterrupt() { SPCR &= ~_BV(SPIE); }

                                          ^~~~

                                          EECR

In file included from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\io.h:99:0,

                 from c:\program files (x86)\arduino\hardware\tools\avr\avr\include\avr\pgmspace.h:90,

                 from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:28,

                 from sketch\sketch_aug20a.ino.cpp:1:

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:310:55: error: 'SPIE' was not declared in this scope

   inline static void detachInterrupt() { SPCR &= ~_BV(SPIE); }

                                                       ^

C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src/SPI.h:310:55: note: suggested alternative: 'ACIE'

exit status 1

Error compiling for board ATtiny25/45/85.



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
2

It looks to me like the SPI library that was selected does not support the ATtiny85 processor. Are you sure your sketch will run on an ATtiny85?

3

Well before including it I was getting this error.

Arduino: 1.8.15 (Windows 10), Board: "ATtiny25/45/85, ATtiny85, Internal 1 MHz"

Sketch uses 676 bytes (8%) of program storage space. Maximum is 8192 bytes.

Global variables use 9 bytes (1%) of dynamic memory, leaving 503 bytes for local variables. Maximum is 512 bytes.

C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -pattiny85 -cjtag3isp -Uflash:w:C:\Users\margu\AppData\Local\Temp\arduino_build_151732/sketch_aug20a.ino.hex:i 



avrdude: Version 6.3-20190619

         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         Copyright (c) 2007-2014 Joerg Wunsch



         System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf"



         Using Port                    : usb

         Using Programmer              : jtag3isp

avrdude: usbhid_open(): No device found

avrdude: usbhid_open(): No device found

avrdude: jtag3_open_common(): Did not find any device matching VID 0x03eb and PID list: 0x2110, 0x2140



avrdude done.  Thank you.



An error occurred while uploading the sketch



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

I should mention I've tried out every driver available in Zadig

4

Which tiny85 core are you using? I recommend the ATTinyCore core.

5

That has nothing to do with an SPI library. It's saying it can't find the 'jtag3isp' device you told it to use for upload. Did you have a 'jtag3isp' connected to your PC?

6

This topic was automatically closed 120 days after the last reply. New replies are no longer allowed.