the MJLJ is primarily built around the Ford EDIS module so it isn't very compatible with my motorcycle motors. While the point triggering and last revolution calculation is not the most optimal solution, the question is, would it work.
A Hall/opto or VR trigger might be possible at a later date, but for now, a MAP sensor and points trigger should be sufficient for the time being. even at 11000 rpm, a full revolution is only 5.455ms, There should be more than enough time on the processor for even a 1* accuracy setup on a full neutral rev-up (even at 1000 to 11000rpm in 1 second).
As for startup, even with a bit of inaccuracy, with a 3D table the starting section can be tuned to the best starting timing.