# Feasible project?

**URL:** <https://forum.arduino.cc/t/feasible-project/1455045>\
**Category:** General Guidance\
**Created:** [August 8, 2026, 1:08pm UTC](https://forum.arduino.cc/t/feasible-project/1455045 "2026-08-08T13:08:00Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![kiliks4923](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/kiliks4923/32/1280071_2.png) [@kiliks4923](https://forum.arduino.cc/u/kiliks4923)\
**Post date:** [August 8, 2026, 1:08pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/1 "2026-08-08T13:08:00Z")

</div>

Complete beginner here and want to know if this project is feasible with the help of Claude.

I want to build two sensors, which attach on my mid and upper back via an adhesive, which measure the bend of the spine, and vibrate or somehow alert me when a certain angle threshold is reached. Basically, they need to measure their position relative to one another.

For someone with no experience in electronics, is this a project worth taking on for me or is it too much?

Feel free to ask any questions and thank you!

---

<div class="post-metadata">

**Author:** ![alto777](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/alto777/32/317385_2.png) [@alto777](https://forum.arduino.cc/u/alto777)\
**Post date:** [August 8, 2026, 1:12pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/2 "2026-08-08T13:12:17Z")

</div>

It's not an ideal first project. It's not even a not-ideal first project.

I could say it would not be a good idea to undertake as a first project. Or second. Or third.

a7

---

<div class="post-metadata">

**Author:** ![cedarlakeinstruments](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/cedarlakeinstruments/32/1128931_2.png) [@cedarlakeinstruments](https://forum.arduino.cc/u/cedarlakeinstruments)\
**Post date:** [August 8, 2026, 1:13pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/3 "2026-08-08T13:13:53Z")

</div>

Should be feasible with an Adafruit bend sensor [Short Flex Sensor : Adafruit Industries, Unique & fun DIY electronics and kits](https://www.adafruit.com/product/1070)

Depends on the angle you want to measure and how precise the sensor is but unlike the other poster, I think it's a first project that's within reach.

[edit]

I tried it with the free version of Claude and it returned code that at least at first glance looked like it would work.

---

<div class="post-metadata">

**Author:** ![sonofcy](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/sonofcy/32/1283617_2.png) [@sonofcy](https://forum.arduino.cc/u/sonofcy)\
**Post date:** [August 8, 2026, 1:36pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/4 "2026-08-08T13:36:27Z")

</div>

I know that Bill over at Dronebot Workshop did some work with those sensors

Here is article link [Article](https://dronebotworkshop.com/myoware/) and [video](https://youtu.be/wMVL3d2dN9U?si=ILiE3wuu0UZUHA1a)

---

<div class="post-metadata">

**Author:** ![dougp](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/dougp/32/238908_2.png) [@dougp](https://forum.arduino.cc/u/dougp)\
**Post date:** [August 8, 2026, 4:55pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/5 "2026-08-08T16:55:53Z")

</div>

I'll speculate you wouldn't even need AI.&nbsp; Connect two MPU6050 3 Axis Accelerometers to your controller (I2C) and display the _difference_ in angle between them.&nbsp; Libraries exist for the MPU6050 so 'all ya gotta do is' add some relatively simple code to coordinate things.

YMMV

> **[Arduino Guide for MPU-6050 Accelerometer and Gyroscope | Random Nerd Tutorials](https://randomnerdtutorials.com/arduino-mpu-6050-accelerometer-gyroscope/)**
>
> How to use the MPU-6050 accelerometer and gyroscope module with the Arduino board. The MPU-6050 IMU is a 3-axis accelerometer and 3-axis gyroscope sensor.

> **[measuring angles with MPU6050 3 Axis Accelerometer at DuckDuckGo](https://duckduckgo.com/?q=measuring+angles+with+MPU6050+3+Axis+Accelerometer&t=opera&ia=web)**
>
> DuckDuckGo. Privacy, Simplified.

---

<div class="post-metadata">

**Author:** ![cedarlakeinstruments](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/cedarlakeinstruments/32/1128931_2.png) [@cedarlakeinstruments](https://forum.arduino.cc/u/cedarlakeinstruments)\
**Post date:** [August 8, 2026, 5:14pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/6 "2026-08-08T17:14:36Z")

</div>

> [@dougp](#):
>
> I'll speculate you wouldn't even need AI

Someone who doesn't know how to program will.

---

<div class="post-metadata">

**Author:** ![gilshultz](https://avatars.discourse-cdn.com/v4/letter/g/67e7ee/32.png) [@gilshultz](https://forum.arduino.cc/u/gilshultz)\
**Post date:** [August 8, 2026, 5:41pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/7 "2026-08-08T17:41:42Z")

</div>

**Welcome!**  
Based on your questions so far, I don't think you're ready to build this project; not because it isn't possible, but because it appears you're still missing many of the fundamental electronics and programming skills needed to design it successfully.

I'd suggest getting a copy of the _Arduino Cookbook_ and skimming it from cover to cover. Stop and work through the projects that interest you. Most are well explained and will give you a solid foundation to build on.

At this point, I think a neighbor with some Arduino experience would probably be able to provide more practical help than an AI. A project like this benefits greatly from someone who can look over your shoulder, answer questions as they come up, and help you debug both the hardware and software.

---

<div class="post-metadata">

**Author:** ![cedarlakeinstruments](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/cedarlakeinstruments/32/1128931_2.png) [@cedarlakeinstruments](https://forum.arduino.cc/u/cedarlakeinstruments)\
**Post date:** [August 8, 2026, 7:01pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/8 "2026-08-08T19:01:56Z")

</div>

OP isn't building the Space Shuttle. Many people just want to get stuff done and not learn the details of how it all works. I guarantee you that if this level of AI had been around when Arduino started, the combination would have been immediately popular.

There is absolutely nothing about this project that Claude couldn't help with. We're at the point with AI where if a hobbyist wants to do something but not learn the basics, they can get to a solution.

Let's just get used to the new normal.

---

<div class="post-metadata">

**Author:** ![gilshultz](https://avatars.discourse-cdn.com/v4/letter/g/67e7ee/32.png) [@gilshultz](https://forum.arduino.cc/u/gilshultz)\
**Post date:** [August 8, 2026, 7:16pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/9 "2026-08-08T19:16:30Z")

</div>

I agree but the complete beginner will need to understand some electronics, sensors, embedded programming, system power, mechanical design, and how to calibrate and validate your measurements. An AI like Claude can certainly answer questions and help write code, but it can't replace the experience needed to recognize when a design is wrong or why it isn't working.

---

<div class="post-metadata">

**Author:** ![xfpd](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/xfpd/32/1120236_2.png) [@xfpd](https://forum.arduino.cc/u/xfpd)\
**Post date:** [August 8, 2026, 7:41pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/10 "2026-08-08T19:41:32Z")

</div>

> [@kiliks4923](#):
>
> measure the bend of the spine

Wear a hat with a string attached to the top of a high-back chair.

---

<div class="post-metadata">

**Author:** ![cedarlakeinstruments](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/cedarlakeinstruments/32/1128931_2.png) [@cedarlakeinstruments](https://forum.arduino.cc/u/cedarlakeinstruments)\
**Post date:** [August 8, 2026, 7:42pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/11 "2026-08-08T19:42:16Z")

</div>

Of course it can. I use AI to explain to me why things aren't working all the time and to guide me to a solution.

Again, this isn't the Space Shuttle. It's a bend sensor with some indicators.

---

<div class="post-metadata">

**Author:** ![scottcalv](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/scottcalv/32/1126463_2.png) [@scottcalv](https://forum.arduino.cc/u/scottcalv)\
**Post date:** [August 8, 2026, 9:06pm UTC](https://forum.arduino.cc/t/feasible-project/1455045/12 "2026-08-08T21:06:56Z")

</div>

Instead of using two sensors, would one load sensor or one flex sensor work?

Measure the resistance, do some math, and voila you have an angle. Providing you always put it back in the same location on your back.
