So the sensor we are going to use is the KY-022. If you google those you get the code. The KY-022 is the receiver. What would I have to do with the available code, found here;TkkrLab
To make it so that if 2 sensors from the 2 diferent arrays, one from each, see the heatsource, it will send it back to the computer and tell me in what area it is, or so that it simply pops up that the overlapped area of, for example, sensor 1A and 2A, is where the heatsource is. Their will be some kind of blind in between each sensor so their fields of view do not overlap. I will be drawing out a diagram on the board to be used for mounting the sensors on, and a page with that will name each area that can possibly be overlapped, so that you can just do a quick crosscheck. For example, sensors 1C and 2B are detecting an infrared source. (this is simply a small scale model, so we are just going to use infrared) Then I simply go to the table pinned up nearby and trace down with my finger till I find the correct matchup, and the grid reference.