First baby step with esp32 c3 supermini

robinlawrie · September 4, 2025, 12:21pm

ok i found a solution here:

Fail to compile the empty project, Compilation error: exit status 1

opened 01:51PM - 29 Aug 25 UTC

g199209

Type: Question IDE: Arduino IDE

### Board ESP32 ### Device Description Not about hardware. ### Hardware Conf…iguration N/A ### Version v3.3.0 ### Type Bug ### IDE Name Arduino IDE 2.3.6 ### Operating System Windows 11 ### Flash frequency N/A ### PSRAM enabled no ### Upload speed N/A ### Description Compile error, with verbose output enabled: ``` FQBN: esp32:esp32:esp32_family Using board 'esp32_family' from platform in folder: C:\Users\g1992\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.3.0 Using core 'arduino' from platform in folder: C:\Users\g1992\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.3.0 cmd /c if exist "C:\\Users\\g1992\\AppData\\Local\\Temp\\.arduinoIDE-unsaved2025729-37188-1vn6fn.tepfjh\\sketch_aug29a\\partitions.csv" COPY /y "C:\\Users\\g1992\\AppData\\Local\\Temp\\.arduinoIDE-unsaved2025729-37188-1vn6fn.tepfjh\\sketch_aug29a\\partitions.csv" "C:\\Users\\g1992\\AppData\\Local\\arduino\\sketches\\8A475C7650B35E17A4121C88AF4ED35A\\partitions.csv" cmd /c if not exist "C:\\Users\\g1992\\AppData\\Local\\arduino\\sketches\\8A475C7650B35E17A4121C88AF4ED35A\\partitions.csv" if exist "\\partitions.csv" COPY "\\partitions.csv" "C:\\Users\\g1992\\AppData\\Local\\arduino\\sketches\\8A475C7650B35E17A4121C88AF4ED35A\\partitions.csv" cmd /c if not exist "C:\\Users\\g1992\\AppData\\Local\\arduino\\sketches\\8A475C7650B35E17A4121C88AF4ED35A\\partitions.csv" COPY "C:\\Users\\g1992\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.3.0\\tools\\partitions\\{build.partitions}.csv" "C:\\Users\\g1992\\AppData\\Local\\arduino\\sketches\\8A475C7650B35E17A4121C88AF4ED35A\\partitions.csv" ϵͳ�Ҳ��ָ��ļ�� exit status 1 Compilation error: exit status 1 ``` There's no meaningful info in log, only a line of grabled characters: `ϵͳ�Ҳ��ָ��ļ��` Similar to #11726, but I have already reinstall Arduino IDE and ESP32 Board a few times, it doesn't solve the problem. One more thing, I have successed compiled and uploaded to the board, and the Arduino IDE is installed under `D:\xxx` that time. And my D disk is broken, so I reinstall Arduino IDE under `C:\xxx`. It can not compile after that. I have tried to uninstall Arduino IDE, and delete all folder which contains `Arduino` entirly. But it doesn't solve the problem. I think there're some inconsistent files in my system, but I don't know how to investigate further. Any suggestions? ### Sketch ```cpp void setup() { // put your setup code here, to run once: } void loop() { // put your main code here, to run repeatedly: } ``` ### Debug Message ```plain N/A ``` ### Other Steps to Reproduce _No response_ ### I have checked existing issues, online documentation and the Troubleshooting Guide - [x] I confirm I have checked existing issues, online documentation and Troubleshooting guide.

Topic		Replies	Views
Esp32_compilation_error IDE 1.x	5	15927	July 25, 2022
Error compiling for board ESP32C3 Dev Module Programming	2	1695	October 1, 2022
ESP32 Error Compiling Programming	7	2726	May 6, 2021
Error compiling for ESP32 : & was unexpected exit status 1 IDE 1.x	4	3406	January 25, 2023
installation esp32 "errore compiling with any card " IDE 1.x	1	622	May 5, 2021

First baby step with esp32 c3 supermini

Related topics