Delta_G:
Not a bad idea just in case. A quick schematic or wiring diagram would also be a good idea in a case like this I would think.How long are the wires from the buttons to the controller?
Thank you for the quick reply.
The momentary button is connected with 50' of 20ga stranded wire.
Note, I did have this problem when it was all being tested on my bench with 6 inches of wire.
It did only seem to happen though when I would pick up the switch and the wires would drag across other wires.
The button was not screwed down to anything at that time.
I will draw up a wiring diagram.
Thanks again!