The correct values for your project will probably be different than mine. 
I'm far from an EE, most of the component values I've used have been copying from other projects or trial and error. For this project, the resistors in front of the LEDs are 220[ch937] resistors, and the decoupling capacitor on the chip is a 0.1µF cap. There's also a 10k[ch937] pulldown resistor for the button.
I finally put the schematic and eagle files online:
Eagle Files: http://www.fischco.org/storage/arduino/UITS%20Circuit%20People%20Mega8.zip
