# Giga R1 resistor R23

**URL:** <https://forum.arduino.cc/t/giga-r1-resistor-r23/1163272>\
**Category:** GIGA R1 WiFi\
**Created:** [August 29, 2023, 3:50pm UTC](https://forum.arduino.cc/t/giga-r1-resistor-r23/1163272 "2023-08-29T15:50:36Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.arduino.cc/u/awneil)\
**Post date:** [September 1, 2023, 12:08pm UTC](https://forum.arduino.cc/t/giga-r1-resistor-r23/1163272/6 "2023-09-01T12:08:58Z")

</div>

> [@rvsvr](#):
>
> cross out the resistor R23

Not cross it out - mark it as **DNP**.

As @JohnLincoln said in post #3, the tracking **is** there - it's just the component is not populated.

Addendum

There's been several posts about this sort of thing lately - it seems that Arduino are pretty poor at properly & consistently identifying DNP/"Not Fitted" parts:

> [@Uno R4 schematic](https://forum.arduino.cc/t/uno-r4-schematic/1160263/2):
>
> \* 16MHz It appears that they don't bother to identify "Do Not Fit" / "Do Not Populate" parts: frowning_face

☹

---

_[View the full topic](https://forum.arduino.cc/t/giga-r1-resistor-r23/1163272)._