GLCD 240*128 T6963c

Hi every one
i have a GLCD 240*128(T6963c tooshiba) and i wrote below code for that but it does’nt work :frowning:
i simulate my project in protuse and it work very well.
Can you help me ?
Can you guide me for hookup GLCD and mega2560 ?

#include “T6963.h”
T6963 LCD(240,128,6,32);

void setup(){
Serial.begin(9600);
Serial.print("TH: ");
Serial.println(LCD.getTH());
Serial.print("GH: ");
Serial.println(LCD.getGH());

LCD.Initialize();

Serial.println(“Initialized”);
LCD.TextGoTo(0,0);
LCD.writeString(“Hello World”);

}
void loop(){
for(byte _b = 0;_b<240;_b++){
LCD.writePixel(_b,_b>>1,1);
}
for(byte _b=0;_b<128;_b +=8){
LCD.TextGoTo(_b/8,_b/8);
LCD.writeString(“Hello World”);
}
delay(1000);
LCD.clearGraphic();
LCD.createLine(0,0,239,127,1);
delay(1000);
LCD.createLine(239,0,0,127,1);
LCD.clearGraphic();
delay(500);
LCD.clearText();
LCD.setPixel(0,0);
LCD.setPixel(239,0);
LCD.setPixel(239,127);
LCD.setPixel(0,127);
delay(1000);
for(int x=0;x<128;x+=4){
LCD.createLine(0,x,x<<1,127,1);
delay(10);
}
delay(1000);
LCD.createCircle(120,64,32,1);
delay(1000);
LCD.clearGraphic();
LCD.clearText();

LCD.setDispMode(true,true,true,false);
for(byte _b=0;_b<8;_b++){
for(byte _row = 0;_row < LCD.getTextRows();_row++){
for(byte _col = 0;_col < LCD.getTextCols();_col++){
LCD.setCursorPointer(_col,_row);
delay(100);
}
}
LCD.setCursorPattern(_b);
}
LCD.setDispMode(true,true,false,false);

}

This program is for a parallel port. So not for TTL / I2C Saint Smart.
Please read times the T6963c.h. There is, as is the port.