GPS Format not readable

Projects Programming
6

I ran the sketch. Here the output I am getting at serial monitor:

Response: "
SEND OK
$GPGGA,191304.000,2227.7441,N,08822.3991,E,1,9,1.00,AT+CIPSEND=12


> $GPGGA,191306.000,2227.7441,N,08822.3991,E,1,9,1.00,16.2,M,-55.7,M,,*46
"
Command: "AT+CIPSEND=12
"
Response: "$GPGGA,191307.000,2227.7441,N,08822.3991,E,1,9,1.00,16.2,M,-55.AT+CIPSEND=12

$GPGGA,191309.000,2227.7441,N,08822.3990,E,1,9,1.00,16.2,M,-55.7,M,,*48
"
Command: "AT+CIPSEND=12
"
Response: "
SEND OK
$GPGGA,191310.000,2227.7441,N,08822.3990,E,1,9,1.00,AT+CIPSEND=12


> $GPGGA,191312.000,2227.7441,N,08822.3990,E,1,9,1.00,16.2,M,-55.7,M,,*42
"
Command: "AT+CIPSEND=12
"
Response: "$GPGGA,191313.000,2227.7441,N,08822.3990,E,1,9,1.00,16.2,M,-55.AT+CIPSEND=12

$GPGGA,191315.000,2227.7441,N,08822.3990,E,1,9,1.00,16.2,M,-55.7,M,,*45
"

But at the server program I am getting as below:

1AT+CIPSEND=1AT+CIPSEND=1AT+CIPSEND=1AT+CIPSEND=1AT+CIPSEND=1AT+CIPSEND=1

But I am not able to see any GPGGA value at Server program

Please advice

Thanks-
Pokhraj