# GSM problem

**URL:** <https://forum.arduino.cc/t/gsm-problem/273849>\
**Category:** GSM Shield\
**Created:** [December 4, 2014, 11:27am UTC](https://forum.arduino.cc/t/gsm-problem/273849 "2014-12-04T11:27:59Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [December 4, 2014, 11:27am UTC](https://forum.arduino.cc/t/gsm-problem/273849/1 "2014-12-04T11:27:59Z")

</div>

**I'm trying to get my arduino GSM shield working with the example "Send SMS" code provided ( I fixed Gsm library ) . However, when I upload and compile the program, the serial monitor displays "SMS Messages Sender" and nothing else occurs.**  
**Would greatly appreciate it if someone can tell me where I could have gone wrong.**  
\*\*I'm currently using the Arduino Mega. I'm following the guide provided by the Arduino's website with the code part of the example that comes with the Arduino program. \*\*  
**I am using both a USB cable and an external power supply. I have performed the jumper wire modification required for the Mega to work with the shield as well.**

PLZ Help me ASAP

---

<div class="post-metadata">

**Author:** ![jacob84401](https://avatars.discourse-cdn.com/v4/letter/j/2acd7d/32.png) [@jacob84401](https://forum.arduino.cc/u/jacob84401)\
**Post date:** [December 5, 2014, 3:47am UTC](https://forum.arduino.cc/t/gsm-problem/273849/2 "2014-12-05T03:47:44Z")

</div>

A couple things.

First, are you using the arduino gsm shield or are you using something else like the SIM900 GSM shield?

Assuming you are using the arduino shield it appears you are not getting a connection al all seeing you don't have the GSM initialized coming across your serial.

Does your Sim card have a PIN if so you will have to put that in?

You might want to add a couple serial prints in the while(not connected) loop just to see which part you are entering it (GSM ready or not)

If you are not using an arduino shield you can't use this example because most of them start up differently. (They aren't hard to figure out, I can help there a lot better)

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [December 5, 2014, 7:35pm UTC](https://forum.arduino.cc/t/gsm-problem/273849/3 "2014-12-05T19:35:01Z")

</div>

I used this

> **[Arduino GSM Shield | Arduino Documentation](https://docs.arduino.cc/retired/shields/arduino-gsm-shield)**
>
> Did you miss this board? No worries! The new Arduino MKR GSM 1400, more capable and richer of functions, is the perfect solution for you!

No Pin in sim card

the code is  
/\*  
SMS sender

This sketch, for the Arduino GSM shield,sends an SMS message  
you enter in the serial monitor. Connect your Arduino with the  
GSM shield and SIM card, open the serial monitor, and wait for  
the "READY" message to appear in the monitor. Next, type a  
message to send and press "return". Make sure the serial  
monitor is set to send a newline when you press return.

Circuit:

- GSM shield
- SIM card that can send SMS

created 25 Feb 2012  
by Tom Igoe

This example is in the public domain.

> **[Send an SMS with MKR GSM 1400 | Arduino Documentation](https://docs.arduino.cc/tutorials/mkr-gsm-1400/gsm-send-sms)**
>
> Learn how to use the Serial Monitor to send text messages to different numbers.

\*/

// Include the GSM library  
#include \<GSM.h\>

#define PINNUMBER ""

// initialize the library instance  
GSM gsmAccess;  
GSM\_SMS sms;

void setup()  
{  
// initialize serial communications and wait for port to open:  
Serial.begin(9600);  
while (!Serial) {  
; // wait for serial port to connect. Needed for Leonardo only  
}

Serial.println("SMS Messages Sender");

// connection state  
boolean notConnected = true;

// Start GSM shield  
// If your SIM has PIN, pass it as a parameter of begin() in quotes  
while(notConnected)  
{  
if(gsmAccess.begin(PINNUMBER)==GSM\_READY)  
notConnected = false;  
else  
{  
Serial.println("Not connected");  
delay(1000);  
}  
}

Serial.println("GSM initialized");  
}

void loop()  
{

Serial.print("Enter a mobile number: ");  
char remoteNum[20]; // telephone number to send sms  
readSerial(remoteNum);  
Serial.println(remoteNum);

// sms text  
Serial.print("Now, enter SMS content: ");  
char txtMsg[200];  
readSerial(txtMsg);  
Serial.println("SENDING");  
Serial.println();  
Serial.println("Message:");  
Serial.println(txtMsg);

// send the message  
sms.beginSMS(remoteNum);  
sms.print(txtMsg);  
sms.endSMS();  
Serial.println("\nCOMPLETE!\n");  
}

/\*  
Read input serial  
\*/  
int readSerial(char result[])  
{  
int i = 0;  
while(1)  
{  
while (Serial.available() \> 0)  
{  
char inChar = Serial.read();  
if (inChar == '\n')  
{  
result _= '\0';_

- Serial.flush();\*
- return 0;\*
- }\*
- if(inChar!='\r')\*
- {\*  
\_ result _= inChar;_\_  
_\* i++;\*_  
_\* }\*_  
_\* }\*_  
_\* }\*_  
_}_

---

<div class="post-metadata">

**Author:** ![gorilla](https://avatars.discourse-cdn.com/v4/letter/g/eada6e/32.png) [@gorilla](https://forum.arduino.cc/u/gorilla)\
**Post date:** [January 10, 2015, 1:14pm UTC](https://forum.arduino.cc/t/gsm-problem/273849/4 "2015-01-10T13:14:27Z")

</div>

Hi, how did you fix the GSM library? Do you know how i can remove unused libraries from GSM library to gain SRAM (i don't use GPRS data transmit/receive)?  
Thanks

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [May 6, 2021, 5:47pm UTC](https://forum.arduino.cc/t/gsm-problem/273849/5 "2021-05-06T17:47:52Z")

</div>

Closed on May 6, 2021, 5:47pm UTC


