# Guys need help with GY 87

**URL:** <https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595>\
**Category:** 3rd Party Boards\
**Created:** [November 21, 2025, 4:52pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595 "2025-11-21T16:52:35Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 21, 2025, 4:52pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/1 "2025-11-21T16:52:35Z")

</div>

I’m unable to access HMC5883L/QMC5883L (IDK what is present but let’s say compass) is not working. I ran I2C scan and found 0x2C, 0x68 and 0x77. I referred to some posts in this forum but it was 10 yrs back, and the code they provided was not even working. Your help is highly needed guys!

PS : MPU6050 and BMP180 is working !

---

<div class="post-metadata">

**Author:** ![J-M-L](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/j-m-l/32/766245_2.png) [@J-M-L](https://forum.arduino.cc/u/J-M-L)\
**Post date:** [November 21, 2025, 5:19pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/2 "2025-11-21T17:19:48Z")

</div>

> [@tylerduden](#):
>
> I ran I2C scan and found 0x2C, 0x68 and 0x77

The standard I2C address for HMC5883L is 0x1E. The QMC5883L typically uses 0x0D. If your scan shows 0x2C, 0x68, and 0x77, neither the HMC5883L nor the QMC5883L is being detected.

0x2C can appear on some sensors or EEPROMs, 0x68 is the MPU6050, and 0x77 is the BMP180.

can you share more information on your wiring and the power ? a picture of the gig ?

---

<div class="post-metadata">

**Author:** ![Brazilino](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/brazilino/32/1198404_2.png) [@Brazilino](https://forum.arduino.cc/u/Brazilino)\
**Post date:** [November 21, 2025, 5:34pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/3 "2025-11-21T17:34:01Z")

</div>

Hi! Welcome to the Forum.

Have you looked at this topic?

> [@Are all new GY-270 Board Magnetometers now fake?!](https://forum.arduino.cc/t/are-all-new-gy-270-board-magnetometers-now-fake/1379276/2):
>
> Buy modern parts from reputable sellers that support their products. Quality is guaranteed, and the performance will be much, much better than those factory floor sweepings. Suggestions:

All those guys have a QMC5883”P” chip at 0x2C adress

---

<div class="post-metadata">

**Author:** ![J-M-L](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/j-m-l/32/766245_2.png) [@J-M-L](https://forum.arduino.cc/u/J-M-L)\
**Post date:** [November 21, 2025, 10:37pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/4 "2025-11-21T22:37:31Z")

</div>

If 0x2C is the address and it’s hardwired differently in the library, that would explain it does not work.

---

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 22, 2025, 5:45am UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/5 "2025-11-22T05:45:03Z")

</div>

| **Arduino** | **GY 87** |
| --- | --- |
| 3.3V | 3.3V |
| GND | GND |
| SDA | SDA |
| SCA | SCA |

This is the wiring I did, and it is working for MPU6050 and BMP180

---

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 22, 2025, 5:45am UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/6 "2025-11-22T05:45:46Z")

</div>

IDK, but however I need your help to fix it

---

<div class="post-metadata">

**Author:** ![pert](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/pert/32/217111_2.png) [@pert](https://forum.arduino.cc/u/pert)\
**Post date:** [November 22, 2025, 5:54am UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/7 "2025-11-22T05:54:56Z")

</div>

I have deleted your other cross-post @tylerduden.

Cross-posting is against the Arduino Forum [rules](https://forum.arduino.cc/faq#keep-tidy). The reason is that duplicate posts can waste the time of the people trying to help. Someone might spend a lot of time investigating and writing a detailed answer on one topic, without knowing that someone else already did the same in the other topic.

Repeated cross-posting can result in a suspension from the forum.

In the future, please only create one topic for each distinct subject matter. This is basic forum etiquette, as explained in [the " **How to get the best out of this forum**" guide](https://forum.arduino.cc/t/how-to-get-the-best-out-of-this-forum/679966). It contains a lot of other useful information. Please read it.

Thanks in advance for your cooperation.

---

<div class="post-metadata">

**Author:** ![J-M-L](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/j-m-l/32/766245_2.png) [@J-M-L](https://forum.arduino.cc/u/J-M-L)\
**Post date:** [November 22, 2025, 7:33am UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/8 "2025-11-22T07:33:24Z")

</div>

If the module has a different address than one expected and hardwired in the library then it’s normal it’s failing.

Post your test code and a link to the library you are using.

---

<div class="post-metadata">

**Author:** ![Brazilino](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/brazilino/32/1198404_2.png) [@Brazilino](https://forum.arduino.cc/u/Brazilino)\
**Post date:** [November 22, 2025, 10:57am UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/9 "2025-11-22T10:57:27Z")

</div>

> [@tylerduden](#):
>
> IDK, but however I need your help to fix it

The first thing I would do is testing the code that is on post #6 of that topic. If it works, it can be adapted in whatever sketch you’re using.

The second thing I would do is trying the library that is linked in post #7.

If you feel comfortable, you can also follow @J-M-L tip and try to discover if the Mag adress is hardcoded on the library you’re using.

---

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 28, 2025, 7:21pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/10 "2025-11-28T19:21:41Z")

</div>

I tried both QMC and HMC but not working

---

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 28, 2025, 7:22pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/11 "2025-11-28T19:22:38Z")

</div>

Yeah, but I tried all possible ways no use 😕

---

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 28, 2025, 7:25pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/12 "2025-11-28T19:25:37Z")

</div>

![image](https://europe1.discourse-cdn.com/arduino/original/4X/a/8/a/a8a0eb4cdf3bcb0526053393ed181b319f374313.jpeg)

I uploaded this img and asked ChatGPT it said “only BMP and MPU6050 are present”. @J-M-L @Brazilino Your help is very much needed

---

<div class="post-metadata">

**Author:** ![J-M-L](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/j-m-l/32/766245_2.png) [@J-M-L](https://forum.arduino.cc/u/J-M-L)\
**Post date:** [November 28, 2025, 7:26pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/13 "2025-11-28T19:26:33Z")

</div>

what about the whole board - both sides ?

---

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 28, 2025, 7:42pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/14 "2025-11-28T19:42:50Z")

</div>

![image](https://europe1.discourse-cdn.com/arduino/original/4X/4/b/a/4ba68a717013174c15f91f8057028ca1bef98ca7.jpeg)

---

<div class="post-metadata">

**Author:** ![Brazilino](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/brazilino/32/1198404_2.png) [@Brazilino](https://forum.arduino.cc/u/Brazilino)\
**Post date:** [November 28, 2025, 7:46pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/15 "2025-11-28T19:46:50Z")

</div>

> [@tylerduden](#):
>
> I uploaded this img and asked ChatGPT it said “only BMP and MPU6050 are present”.

How could it tell that? It’s pretty clear that the board has an HP5883 chip. I would rather believe the board is faulty.

---

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 28, 2025, 7:48pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/16 "2025-11-28T19:48:09Z")

</div>

So what should I do next ?

---

<div class="post-metadata">

**Author:** ![Brazilino](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/brazilino/32/1198404_2.png) [@Brazilino](https://forum.arduino.cc/u/Brazilino)\
**Post date:** [November 28, 2025, 7:51pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/17 "2025-11-28T19:51:12Z")

</div>

Buy another or choose a different board. The MPU9050 was discontinued some years ago.

Although it’s still in use because of the low price, there are other newer options.

ICM-20948 is the newer chip of the same manufacturer (TDK).

---

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 28, 2025, 7:56pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/18 "2025-11-28T19:56:12Z")

</div>

I’m afraid that again the magnetometer in GY87 won’t work if I buy one 😕

---

<div class="post-metadata">

**Author:** ![tylerduden](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tylerduden/32/1128742_2.png) [@tylerduden](https://forum.arduino.cc/u/tylerduden)\
**Post date:** [November 28, 2025, 8:16pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/19 "2025-11-28T20:16:41Z")

</div>

Is buying GY91 worth ?

---

<div class="post-metadata">

**Author:** ![Brazilino](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/brazilino/32/1198404_2.png) [@Brazilino](https://forum.arduino.cc/u/Brazilino)\
**Post date:** [November 28, 2025, 11:23pm UTC](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595/20 "2025-11-28T23:23:55Z")

</div>

If I’m not wrong, the only difference between GY-90 and GY-91 is the pressure sensor, which changes from a BMP180 to a BMP280. In this case I don’t see any advantage. I would go with the ICM-20948.

[Next page](https://forum.arduino.cc/t/guys-need-help-with-gy-87/1415595.md?page=2)
