Gyroscope mpu6050

Hey guys, i am trying to measure movement with my mpu6050. I want to get m/s values from the gyroscope. I successfully read the raw values from the gyroscope. But don’t know how to convert it to m/s. can someone help.

this is my code

#include <Wire.h>
  const int MPU_addr = 0x68;
  int16_t AcX, AcY, AcZ, Tmp, GyX, GyY, GyZ;
  int minVal = 265; int maxVal = 402;
  double x;         //A4 (SDA), A5 (SCL)
  double y;
  double z;



  void setup() {

  Wire.begin();
  Wire.beginTransmission(MPU_addr);
  Wire.write(0x6B);
  Wire.write(0);
  Wire.endTransmission(true);
  Serial.begin(9600);
  }

  void loop() {

  Wire.beginTransmission(MPU_addr);
  Wire.write(0x3B);
  Wire.endTransmission(false);
  Wire.requestFrom(MPU_addr, 14, true);

  AcX = Wire.read() << 8 | Wire.read();
  AcY = Wire.read() << 8 | Wire.read();
  AcZ = Wire.read() << 8 | Wire.read();
  GyX = Wire.read() << 8 | Wire.read(); // 0x43 (GYRO_XOUT_H) & 0x44 (GYRO_XOUT_L)
  GyY = Wire.read() << 8 | Wire.read(); // 0x45 (GYRO_YOUT_H) & 0x46 (GYRO_YOUT_L)
  GyZ = Wire.read() << 8 | Wire.read(); // 0x47 (GYRO_ZOUT_H) & 0x48 (GYRO_ZOUT_L)

  //-----------------------------------------------
 
  Serial.println(GyY);
  delay(50);

  }

This is the output i get,when i keep the sensor still on a flat table

260.00
272.00
300.00
295.00
314.00
269.00
276.00
260.00
279.00
311.00
290.00
293.00
284.00
264.00
304.00
279.00
277.00
296.00
277.00
297.00
276.00
274.00

aehm ... "get m/s values from the gyroscope" ... gyro is °/s, not m/s. And acc is m/s^2, not m/s. And befor you go "oh, just add up all acc values and I get velocity" sit back and take a look as basic calculus, integration.

Sorry i meant degress per sec.