Hi, i'm trying to build a little power supply for my experiments. knowing that a phone charger can be driven from 3.6 to 12V (or 20 for some models) i acquired a silvercrest phone charger with 4 usb ports ( 5-9V) and 1 QC 3.0 port. The problem is i cant get any voltage different from 5V. i followed…

SOLVED. problem was not in the setup or in the code. looking on internet to find the cables of the usb i found loots of images that said "white is data+ and green is data-" like this image [immagine] thinking about at why the handshake goes when i disconnect the "white" cable i looked more about …

Hacking Qualcomm Quick Charge 3.0

Other Hardware General Electronics

shaladrer September 19, 2021, 8:05am 11

here we go. common ground for the QC3, nano powered (at this moment) from my pc

Topic		Replies	Views
Adjustable voltage source from QuickCharge 3.0 (W/simulation) Device Hacking	2	1357	September 2, 2022
quick charge 3.0 phone drawing pulsing current Device Hacking	6	1893	May 6, 2021
Creating a fast (9V) phone charger with arduino? Device Hacking	5	3755	May 6, 2021
Possible to draw constant 12V from a QuickCharge 2.0 Powerbank? General Electronics	10	8522	May 6, 2021
kleine elektrische frage Deutsch	10	1959	May 6, 2021

Hacking Qualcomm Quick Charge 3.0

Related topics