Hello, i'm having problems with a led blinking code using a Mini D1 ESP32. In short, everytime i try to upload, using my laptop, it gives me this error: Sketch uses 236793 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 21048 bytes (6%) of dynamic memory, leaving 306632 bytes for local variables. Maximum is 327680 bytes. esptool.py v4.5.1 Serial port COM3 Connecting... A serial exception error occurred: Write timeout Note: This error originates from pySerial. It is likely not a problem with esptool, but with the hardware connection or drivers. For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html Failed uploading: uploading error: exit status 1 The funny thing is that i tried it on my other PC and it works, so at least i know the problem is not the cable or the board itself. Anything could help.

it tells you what to investigate [image] salvatore_zuccaro: It is likely not a problem with esptool, but with the hardware connection or drivers. change usb cable, ensure you have the right port selected, do you have the right driver, is the right board selected, ...

ESP32S3 no connection error - Hardware - Arduino Forum

Thank you all, i fixed, It was a driver problem

Hello, can u please mention how you fixed the issue. I have the following issue. would really appreciate if anyone can help me fix this Sketch uses 236797 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 21048 bytes (6%) of dynamic memory, leaving 306632 bytes for local variables. Maximum is 327680 bytes. esptool.py v4.5.1 Serial port COM4 Connecting... A serial exception error occurred: Write timeout Note: This error originates from pySerial. It is likely not a problem with esptool, but with the hardware connection or drivers. For troubleshooting steps visit: Troubleshooting - ESP32 - — esptool.py latest documentation Failed uploading: uploading error: exit status 1

Having problems with ESP32

Development Tools Uploading

marbat57 July 15, 2024, 2:54am 7

I have the same problem. I tried the solution on ESP32S3 no connection error - #7 by salvatore_zuccaro, but it did not work. My issue is also ONLY on laptop

Topic		Replies	Views
ESP32 Issue with code upload Uploading	3	330	February 20, 2025
I can't upload my sketch to xiao_esp32s3 Uploading	4	254	October 8, 2025
ESP32 reprogramming help - solved General Guidance	3	131	October 18, 2026
Uploaden mislukt: uploadfaut: exitstatus1 Nederlands	2	99	December 27, 2025
ESP 32 code not uploading Uploading	8	1324	February 27, 2026

Having problems with ESP32

Related topics