Having trouble getting bluesmirf silver to auto connect with my phone

Projects Programming
1

I am using an Arduino Uno with a bluesmirf silver module trying to get it to auto connect to my LG Optimus. I have tried several different setup configs, and can not seem to get it to work, any help would be appreciated, I am very new to this.

2

I finally got the BlueSmirf to auto-connect, I have been working on this for a couple of days, here are my settings so someone else does not have to go through what I did.

Settings
BTA=(bluesmirf address)
BTName=(bluesmirf name)
Baudrt(SW4)=9600
Mode =Pair
Authen=1
PinCod=1234
Bonded=0
Rem=(remote device address)

ADVANCED Settings
SrvName= SPP
SrvClass=0000
DevClass=1F00
InqWindw=500
PagWindw=500
CfgTimer=255
StatuStr=NULL
HidFlags=200
DTRtimer=8
KeySwapr=0

OTHER Settings
Profile= HID
CfgChar= $
SniffEna=500
LowPower=0
TX Power=0
IOPorts= 0
IOValues=404 (set using S~, 4040 (although not sure, I believe this sets GPIO3 high, Auto Discovery/Pairing)
Sleeptmr=0
DebugMod=0
RoleSwch=0

3

Sorry IO setting is with S^ not S~