Hello everyone! I made a clock using RTC1307 module and as it doesn't automatically autocorrect time I have to correct the time . My current time and date is set to 12:00 AM 0/0/1970. I want to know how to set it to present time

[Idahowalker]

Thank you for being so cooperative and helpful with info.

You would be wise to learn how to put your code in code tags.

@adeeshabro

the error it gave was

avrdude: stk500_paged_load(): (a) protocol error, expect=0x10, resp=0x00

avrdude: stk500_cmd(): programmer is out of sync

avr_read(): error reading address 0x0000

read operation not supported for memory "flash"

avrdude: failed to read all of flash memory, rc=-2

avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x00

That is not a issue with your sketch but a possible issue with your microcontroller board or not selecting the correct board or a whole host of other things.

Can you post that image of your setup and let us know which board you are using?