Help: 16 x 2 I2C Display by MIDAS Using RW1063 controller

Using Arduino Displays
#1

Hi All

I have a project using an Arduino Nano and would like to use a Midas 16 x 2 Display which uses the RW1063 controller but I cannot find any libraries that will work with the display.

I have attached the data sheets and some code for a different processor that was supplied by Midas.

Can anyone please point me in the the direction, has anyone used this particular display or display controlled with success.

Mak

MC21605C6W-SPTLYI-V2.pdf (445 KB)

#2

makidoja:
I have attached the data sheets and some code for a different processor that was supplied by Midas.

No, you haven't.

#3

Ah size limits

RW1063_IIC_5V (MC21605C6W).txt (7.84 KB)

RW1063-0B-002 V0.5_131126.pdf (1.71 MB)

#4

The i2c message interface appears to be the same as the the RayStar or the PCF2116/PCF2119 chips.
If it is is, then the hd44780 library can run the display.
You would use the hd44780_I2Clcd i/o class.
The hd44780 library is available in the IDE library manager.
Here is the git repo: GitHub - duinoWitchery/hd44780: Extensible hd44780 LCD library

--- bill

#5

Hi Bill

Thanks, i'll give it a try

Mak

#6

Hello Mak,
Do you get it work your display?
Thanks,
LiLy

#7