Help combining FSR + Piezo codes

Using Arduino Programming Questions
#1

I’m trying to combine the force sensitive resistor code with the piezo (using the codes from the Arduino Experimenter’s Guide)- so that squeezing the FSR will turn the piezo off. I have basically no coding experience and despite looking through every resource I can find I can’t figure out what I’m supposed to be doing that I’m not. Can anyone help?

int sensePin = 2;
int speakerPin = 9;

int length = 15; 
char notes[] = "ccggaagffeeddc ";
int beats[] = { 1, 1, 1, 1, 1, 1, 2, 1, 1, 1, 1, 1, 1, 2, 4 };
int tempo = 300;

void playTone(int tone, int duration) {
  for (long i = 0; i < duration * 1000L; i += tone * 2) {
    digitalWrite(speakerPin, HIGH);
    delayMicroseconds(tone);
    digitalWrite(speakerPin, LOW);
    delayMicroseconds(tone);
  }
}

void playNote(char note, int duration) {
  char names[] = { 'c', 'd', 'e', 'f', 'g', 'a', 'b', 'C' };
  int tones[] = { 1915, 1700, 1519, 1432, 1275, 1136, 1014, 956 };
  for (int i = 0; i < 8; i++) {
    if (names[i] == note) {
      playTone(tones[i], duration);
    }
  }
}

void setup() {
  Serial.begin(9600);
  pinMode(speakerPin, OUTPUT);
}

void loop() {
  int value = analogRead(sensePin) /4;
  analogWrite(speakerPin, value);
  for (int i = 0; i < length; i++) {
    if (notes[i] == ' ') {
      delay(beats[i] * tempo); 
    } else {
      playNote(notes[i], beats[i] * tempo);
    }
   
    delay(tempo / 2); 
  }
}
#2