Hi everyone I'm new here, I got gifted about 30 kyocera f and fc-51852. Really cool oled's with different bi-colored displays some are blue or yellow or black on white or white on black. I can get them working with their controller board via serial and a pc. I've recently been integrating different displays with my arduino collection. I built an awesome sensor box with temp sensors and pressure sensors sending all that data over serial, ethernet and to a lcd display. I'd really like to get the oled's working they seem so much more capable. so I'm attaching a pdf of the schematics, important points seem to be u2 which is an atmega 16, j4 which apparently is tx, rx. when jumpered those tx and rx connections are forwarded to an rs-232 or you can connect directly to the tx rx pins without jumpers. there's also the j2 standard ICSP. At the moment I'm trying to use the controller board but I only have one controller board, J1 shows the pin out for the display, ideally I would be able to connect these display directly to an arduino without the controller board. Anyone who might be able to help let me know I have the schematics which I'm attaching I also have the manual and data sheets.
TC553852Schematic.pdf (131 KB)