if ( 11 == HIGH && 4 == HIGH && dly<= 500 ) { digitalWrite(11,LOW); digitalWrite(8,HIGH); delay(100);} else { digitalWrite(7, HIGH); delay(100); digitalWrite(7, LOW);} HI, I have a big problem with that. i have pin 11 as binary output. pin 8 as digital output. pin 7 as condition output. pin 4…

HELP ME ,PLZ.

6v6gt May 24, 2018, 10:47am 4

perhaps not

if ( 11 == HIGH . . .

but

if ( digitalRead( 11 ) == HIGH . . .