Help to find the good libraries for a sketch

Projects Programming
1

Hello, I'm Emmanuel From FRANCE, I've found this sketch on the web but he don't compile well because of the libraries that are wrong. Can someone tell me where to find the good libraries or send it to me ( my email: removed) for this sketch and correct it if there are mistake in the sketch himself and explain it a little to me. Thank you a lot for your right answer, Emmanuel

#include <TFT_eSPI.h>
#include "Fonts.h"
#include "Xbm.h"
//#include <Free_Fonts.h>


TFT_eSPI tft = TFT_eSPI();
TFT_eSprite smaint = TFT_eSprite(&tft);   // Sprite object smaint
TFT_eSprite smainp = TFT_eSprite(&tft);   // Sprite object smaint
TFT_eSprite smaini = TFT_eSprite(&tft);   // Sprite object smaint
TFT_eSprite smainw = TFT_eSprite(&tft);   // Sprite object smaint
TFT_eSprite smainpr = TFT_eSprite(&tft);  // Sprite object smaint

int power_percent;
String power_string;
int real_temp;
int o = 14;
float input_voltage = 36.4;
int power = 200;
String voltage_str, power_str;
int presset_temp[] = { 300, 350, 400 };
int screen = 0;
int state = 1;
int set_temp = 350;
int state1 = 1;
String state1_str[] = { "OFF", "Heating", "Standby" };
int iron_type = 0;
String iron_type_str[] = { "T245", "T12" };


//==========================================================================================
void setup() {
  Serial.begin(115200);
  tft.init();
  tft.fillScreen(TFT_BLACK);
  tft.setRotation(0);
  tft.invertDisplay(false);
  tft.color
  
  smaint.createSprite(210, 85);
  smainp.createSprite(52, 225);
  smaini.createSprite(320, 15);
  smainw.createSprite(210, 80);
  smainpr.createSprite(200, 25);

  smaint.fillSprite(TFT_BLACK);
  smaint.setTextColor(TFT_CYAN, TFT_BLACK);

  smainp.fillSprite(TFT_BLACK);
  smainp.setTextColor(TFT_CYAN, TFT_BLACK);

  smaini.fillSprite(TFT_BLACK);
  smaini.setTextColor(TFT_WHITE, TFT_BLACK);

  smainw.fillSprite(TFT_BLACK);
  smainw.setTextColor(TFT_WHITE, TFT_BLACK);

  smainpr.fillSprite(TFT_BLACK);
  smainpr.setTextColor(TFT_WHITE, TFT_BLACK);
Serial.printf("x%d, y%d", tft.height(),tft.width());  
}

//==========================================================================================
long prmillis1, prmillis2, prmillis3;
int i;
String data;
void loop() {
  if (screen == 0) Mainscreen();
}



void Mainscreen_temp() {
  real_temp = 499;//map(analogRead(26), 0, 4096, 0, 500);

  smaint.setTextSize(1);
  smaint.setFreeFont(&DSEG7_Classic_Mini_Regular_80);
  smaint.drawNumber(real_temp, 200, 42);
  if (real_temp < 100) smaint.fillRect(0, 0, 60, 85, TFT_BLACK);
  if (real_temp < 10) smaint.fillRect(60, 0, 80, 85, TFT_BLACK);

  smaint.setFreeFont(&TomThumb);
  smaint.setTextDatum(MR_DATUM);
  smaint.drawString("o", 198, 3, 2);
  smaint.setFreeFont(&FreeMono12pt7b);
  smaint.drawString("C", 210, 9);

  smaint.pushSprite(o + 48, 110);
}

void Mainscreen_power() {
  power_percent = 100; //map(analogRead(26), 0, 4095, 0, 100);
  smainp.setTextColor(TFT_WHITE, TFT_BLACK);
  smainp.setFreeFont(&Roboto_Light_16);
  smainp.setTextDatum(MC_DATUM);
  smainp.drawRect(15, 15, 20, 180, 0x195AFF);
  smainp.fillRect(0, 200, 50, 25, TFT_BLACK);
  power_string = "";
  power_string += power_percent;
  power_string += "%";
  smainp.drawString(power_string, 25, 207);

  smainp.fillRectVGradient(16, 16, 18, 178, TFT_RED, TFT_BLUE);
  smainp.fillRect(16, 16, 18, map(power_percent, 0, 100, 178, 0), TFT_BLACK);

  smainp.pushSprite(0, 16);
}

void Mainscreen_info() {
  smaini.setTextDatum(TL_DATUM);
  smaini.setFreeFont(&Roboto_14);
  voltage_str = "";
  voltage_str += input_voltage;
  voltage_str += "V";
  smaini.drawString(voltage_str, 0, 2);
  power_str = "";
  power_str += power;
  power_str += "W";
  smaini.drawString(power_str, 65, 2);
  smaini.setTextDatum(TC_DATUM);
  smaini.drawString("15:45", 160, 2);
  smaini.setTextDatum(TR_DATUM);
  smaini.drawString("v2.0", 320, 2);

  smaini.pushSprite(0, 0);
}

void Mainscreen_presset() {
  tft.drawLine(0, 15, 320, 15, TFT_DARKGREY);
  smainpr.drawRect(0, 0, 50, 25, 0x195AFF);
  smainpr.drawRect(67, 0, 50, 25, 0x195AFF);
  smainpr.drawRect(132, 0, 50, 25, 0x195AFF);
  smainpr.setTextColor(TFT_WHITE, TFT_BLACK);
  smainpr.setFreeFont(&Roboto_Light_16);
  smainpr.setTextDatum(MC_DATUM);
  smainpr.drawNumber(presset_temp[0], 25, 12);
  smainpr.drawNumber(presset_temp[1], 92, 12);
  smainpr.drawNumber(presset_temp[2], 157, 12);
  smainpr.pushSprite(72, 215);
}

void Mainscreen_widgets() {
  smainw.fillRect(100, 10, 2, 7, TFT_LIGHTGREY);
  smainw.fillRect(100, 21, 2, 7, TFT_LIGHTGREY);
  smainw.fillRect(100, 32, 2, 7, TFT_LIGHTGREY);
  smainw.fillRect(100, 43, 2, 7, TFT_LIGHTGREY);
  smainw.fillRect(100, 54, 2, 7, TFT_LIGHTGREY);
  smainw.fillRect(100, 65, 2, 7, TFT_LIGHTGREY);
  if (state == 1) smainw.drawXBitmap(0, 12, temp_high, temp_high_width, temp_high_height, TFT_BLACK, TFT_RED);
  if (state == 0) smainw.drawXBitmap(0, 12, temp_low, temp_low_width, temp_low_height, TFT_BLACK, TFT_BLUE);
  smainw.setTextDatum(MC_DATUM);
  smainw.setFreeFont(&Monospaced_bold_16);
  smainw.drawString("SET", 54, 20);
  smainw.drawRect(30, 40, 50, 25, 0x195AFF);
  smainw.setFreeFont(&Roboto_Light_16);
  smainw.drawNumber(set_temp, 55, 52);
  smainw.setTextDatum(MC_DATUM);
  smainw.setFreeFont(&Monospaced_bold_16);
  if (state1 == 0){smainw.setTextColor(TFT_BLUE); smainw.drawString(state1_str[state1], 160, 20);}
  if (state1 == 1){smainw.setTextColor(TFT_RED); smainw.drawString(state1_str[state1], 160, 20);}
  if (state1 == 2){smainw.setTextColor(TFT_GREEN); smainw.drawString(state1_str[state1], 160, 20);}
  smainw.setFreeFont(&Monospaced_bold_16);smainw.setTextColor(TFT_WHITE);smainw.drawString(iron_type_str[iron_type], 160, 52);
  smainw.pushSprite(60, 20);
}


void Mainscreen() {
  if (millis() - prmillis2 >= 150) {
    prmillis2 = millis();
    Mainscreen_info();
  }
  if (millis() - prmillis1 >= 50) {
    prmillis1 = millis();
    Mainscreen_power();
    Mainscreen_temp();
  }
  if (millis() - prmillis3 >= 500) {
    prmillis3 = millis();
    Mainscreen_presset();
    Mainscreen_widgets();
  }
}

Now, here are the message that give me the arduino IDE that i used 1.8.19

thermometre:153:23: error: 'Monospaced_bold_16' was not declared in this scope
153 | smainw.setFreeFont(&Monospaced_bold_16);
| ^~~~~~~~~~~~~~~~~~
thermometre:156:23: error: 'Roboto_Light_16' was not declared in this scope
156 | smainw.setFreeFont(&Roboto_Light_16);
| ^~~~~~~~~~~~~~~
C:\Users\manu_espagne\Documents\Arduino\thermometre\thermometre.ino: At global scope:
thermometre:184:7: error: expected constructor, destructor, or type conversion before '(' token
184 | image (11)
| ^
Utilisation de la bibliothèque TFT_eSPI version 2.5.43 dans le dossier: C:\Users\manu_espagne\Documents\Arduino\libraries\TFT_eSPI
Utilisation de la bibliothèque SPI version 3.0.7 dans le dossier: C:\Users\manu_espagne\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.7\libraries\SPI
Utilisation de la bibliothèque FS version 3.0.7 dans le dossier: C:\Users\manu_espagne\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.7\libraries\FS
Utilisation de la bibliothèque SPIFFS version 3.0.7 dans le dossier: C:\Users\manu_espagne\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.7\libraries\SPIFFS
exit status 1
'DSEG7_Classic_Mini_Regular_80' was not declared in this scope

sterretje edit: email address removed

2

Please enclose all and only the code inside "code" tags: edit your first post, remove all the sketch code, paste it back from the original one, select the code ad press the "<CODE/>" top button.
It's a good idea to do the same also for the outputs (serial or compiler).

3

I've removed your emaim address in the opening post. You can put it back if you want to receive spam :wink:

4

If the sketch does not compile with standard libraries, it means that the author has changed them or these are his custom libraries. In this case, the libraries can usually be downloaded from the same site where the code is posted.
Since you did not write where this code is from, it is unlikely that anyone will be able to help you.

You need to remember where you downloaded the sketch from and look on that site to see if there are any libraries there. If you do not find any, try contacting the author of the code.

5

And there Emmanuel sits, waiting at his inbox... :wink:

6

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.