someone heip me
what's happen??
Arduino:1.6.5 Hourly Build 2015/06/01 03:35 (Windows 7), 板子："Arduino Uno"
建置選項已變更，重建所有
草稿碼使用了 4,648 bytes (14%) 的程式存儲空間。最大值為 32,256 bytes。
全域變數使用了 263 bytes (12%) 動態記憶體，剩餘 1,785 bytes 的局部變數。最大值為 2,048 bytes 。
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x05
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x05
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x05
上傳到板子時發生問題。可行建議請見http://www.arduino.cc/en/Guide/Troubleshooting#upload。
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x05
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x05
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x05
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x05
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x05
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x05
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x05
這份報告的詳情將會在
"編譯時顯示詳細輸出資訊"
在檔案 > 偏好設定裡啟用。