An NDP6020P seems to be a p-channel mosfet, so the above diagram is not right.
The one from post#0 is (if the source was connected to 12volt).
Just use a single n-channel logic fet.
First diagram here. Load = LED strip, and no diode needed
Leo..
An NDP6020P seems to be a p-channel mosfet, so the above diagram is not right.
The one from post#0 is (if the source was connected to 12volt).
Just use a single n-channel logic fet.
First diagram here. Load = LED strip, and no diode needed
Leo..