Homing 2 steppermotors with different steps

[DaveX]

Try this MobaTools example, it homes the X&Y motors by

1. slowly backing off CCW a set amount, then
2. moves CW slowly at a slow speed until it hits the limit switch (someone pushes their buttons) and then
3. it zeros and
4. it runs full speed CCW.

@DaveX

There are a couple Mobatools MobaStepper examples that move steppers to homing switches. This one might have some of the infrastructure you need:

@DaveX

Stepper Reference_2 Example: Three axis steppers with X,Y homing cycle