# How do I buffer/Amp stepper current?

**URL:** <https://forum.arduino.cc/t/how-do-i-buffer-amp-stepper-current/1210756>\
**Category:** Motors, Mechanics, Power and CNC\
**Created:** [January 14, 2024, 1:49am UTC](https://forum.arduino.cc/t/how-do-i-buffer-amp-stepper-current/1210756 "2024-01-14T01:49:22Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![anon94801460](https://avatars.discourse-cdn.com/v4/letter/a/278dde/32.png) [@anon94801460](https://forum.arduino.cc/u/anon94801460)\
**Post date:** [January 14, 2024, 1:52am UTC](https://forum.arduino.cc/t/how-do-i-buffer-amp-stepper-current/1210756/2 "2024-01-14T01:52:05Z")

</div>

> [@ibbob](#):
>
> add any additional current for the steppers

A suitable stepper driver is used to control the stepper current, and you should be using a separate power supply for any motors, steppers, servos, etc. Please post the details of your setup, especially the steppers, and a wiring diagram.

You should find this tutorial helpful:

> [@Stepper Motor Basics](https://forum.arduino.cc/t/stepper-motor-basics/275223):
>
> Introduction I find myself repeatedly typing similar replies to similar questions about the basics of stepper motors and I thought it would be useful to write this note as it will be a little more comprehensive than any individual reply. The information is presented under several different headings and there is quite a bit of overlap and cross-referencing of ideas so I suggest that you should read all of the note at least once. I think it would be possible to miss some important info if you o…

---

_[View the full topic](https://forum.arduino.cc/t/how-do-i-buffer-amp-stepper-current/1210756)._
